Download Print this page

Huawei F361 Faq

Gsm handset
Hide thumbs Also See for F361:

Advertisement

Quick Links

The Basics:
1. Handset appearance
NO
Component
Navigation
keys
1
Right
function key
2
End key
3
Microphone
4
Numeric and
5
Symbol keys
2013-1-21
Handset F361 FAQ
GSM Handset F361 FAQ
8
7
6
5
Front view
I
n standby mode, press OK to access the main menu.
In standby mode, press a navigation key to access specific
shortcut menu.
During a call, press left or right navigation key to adjust the
call volume。
Press this key to select the menu option in the lower right
corner of the screen.
Press this key to end or cancel a call.
Press and hold this key to power on or off the phone.
In standby mode, press this key to turn on/off the display
screen.
In non-standby mode, press this key to return to standby mode
Microphone.
The power indicator is steady red when the phone is connected
to a power supply.
华为机密,未经许可不得扩散
1
2
3
4
Introduction
Internal
第 1 页, 共 10 页

Advertisement

loading

Summary of Contents for Huawei F361

  • Page 1 Handset F361 FAQ Internal GSM Handset F361 FAQ The Basics: 1. Handset appearance Front view Component Introduction n standby mode, press OK to access the main menu. Navigation keys In standby mode, press a navigation key to access specific shortcut menu.
  • Page 2: Installing The Battery

    Handset F361 FAQ Internal Component Introduction Press the keys to input numbers or characters. Keys 1 to 9: In standby mode, press and hold the 1 key to access voicemail. Press and hold keys 2 to 9 for speed dialing when Speed dial is activated.
  • Page 3 Handset F361 FAQ Internal Charging the Battery Using the Power Adapter Method 1: Method 2:   If you plan to leave the phone unused for a long period, you must  remove the battery from the phone. If your battery power is exhausted or the battery is unused for a long ...
  • Page 4 Handset F361 FAQ Internal 1) Lengthen the time when press the power key. 2) F361cannot only use charger to boot, the battery should be installed correctly. 3) Charge the battery first if it is low battery. 4) Caused by over discharge. If the phone is unused for a long period, it needs a procedure when charge the battery.
  • Page 5 Handset F361 FAQ Internal 1) Without outer power supply, the reserved battery can maintain call for 3 hours, or 100 hours to standby (reference value, actual call time and standby time depends on network state). 2) The battery is put in package. Before using, users need to install the battery into the battery slot on the phone.
  • Page 6 Handset F361 FAQ Internal GSM 900 MHz:33dBm【+/-2dBm】 GSM 850 MHz:33dBm【+/-2dBm】 DCS 1800 MHz:30dBm【+/-2dBm】 ; PCS 1900 MHz:30dBm【+/-2dBm】 What is the static sensitivity? GSM 900 MHz:Better than-102dBm/200KHz ; GSM 850 MHz:Better than-102dBm/200KHz ; DCS 1800 MHz:Better than -102dBm/200KHz ; PCS 1900 MHz:Better than -102dBm/200KHz ;...
  • Page 7 Handset F361 FAQ Internal three parties, etc) Support call divert, call waiting, three parties, and call barring (need network support) 39. How to operate with call divert, call waiting, and call barring? Press left function key, enter Settings, Call settings. There are call divert, call waiting, and call barring in the menu.
  • Page 8 Handset F361 FAQ Internal Call history settings tools Extend Knowledge: 41. How to deal if the call time is incorrect? Press left function key If the time is still incorrect after modified, send the phone to local maintain station. 42. Whether support power off alarm? Supported;...
  • Page 9 Handset F361 FAQ Internal 46. Does the handset support FM radio? Supported; 47. How to check time duration for every call and Total call time? After finishing the call, the handset will prompt the time duration of the call. The time duration of every call cannot be checked in call logs. Can not show the accumulated call time.
  • Page 10 Handset F361 FAQ Internal one linkman. Setting measure: when set new linkman, select one group, and set up the phone ring, after this the call ring of linkman is the setting ring. 60. How to lock and unlock keyboard fast? In IDLE interface long press ”#”...