HVI VLF-34E Operator's Manual

Vlf series of ac hipots

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Safety, Operation, and Procedure Instructions for the VLF Series of

AC Hipots

Equipment to be used by trained personnel only

This Operator Manual contains instructions for the operation of a High Voltage power source. The operator of this equipment

must use good judgement and follow all safety precautions noted in this guide to ensure the protection of himself and others in

close proximity to the test area

death. Proper grounding of the test set must be done prior to connecting this unit

to a power source.

Please Refer to

Documentation

Before Operation

Danger- Lethal Voltages:

. Failure to follow the instructions could result in injury or

VLF-34E

Mi n e

SERIES

Table of Contents

Need help?

Do you have a question about the VLF-34E and is the answer not in the manual?

Questions and answers

Summary of Contents for HVI VLF-34E

Page 1 VLF-34E Mi n e SERIES Safety, Operation, and Procedure Instructions for the VLF Series of AC Hipots Please Refer to Documentation Before Operation Danger- Lethal Voltages: Equipment to be used by trained personnel only This Operator Manual contains instructions for the operation of a High Voltage power source. The operator of this equipment must use good judgement and follow all safety precautions noted in this guide to ensure the protection of himself and others in .
Page 2 VLF Operator Manual  HIGH VOLTAGE, INC. 31 Route 7A Copake, N.Y. 12516 Phone 518/329-3275 • Fax 518/329-3271 http://www.hvinc.com E-Mail: factory@hvinc.com...
Page 3: Table Of Contents
General Information Features and Specifications What’s in the Box Operating Environment Safety Symbol Identification S E C T I O N 2 Setting up the Equipment Operating the Equipment 9-16 Return Material Terms and Conditions 18,19 Last saved 2/5/2015 T:\DOCUMENTS\Manuals\VLF\VLF-34E\VLF-34E_Manual_R_working.doc...
Page 4: About The Operator Manual
O P E R A T O R M A N U A L About the Operator Manual Important This Operator Manual describes the features and safe operation of a High Voltage AC Test Set. The instructions are intended to be clear and simple, but the operator must be trained and qualified according to the customer’s established procedures for the use of this type of equipment.
Page 5: General Information
General Informati o n This section familiarizes the operator with the features and specifications of the VLF-34E AC Hipot manufactured by HIGH VOLTAGE, INC. Features and Specifi c ations Input Voltage: 115 Vac – 230 Vac, 50 Hz/60Hz, 5A max Input Fuse: 5x20mm, 250Vac, Type F 2.5A-250V Input...
Page 6 O P E R A T O R M A N U A L Current: mA peak or RMS Calculated: Capacitance, Resistance, Flashover voltage, Time to Failure Size/Weight: 19.7” x 12.0” x 18”, 45 lbs. 500mm x 305mm 458mm, 21 kg. Case: Hard “Pelican”...
Page 7 O P E R A T O R M A N U A L CAUTION: Disconnect all power before servicing. There are no user serviceable parts. Service should be performed by Qualified personnel...
Page 8: What's In The Box
O P E R A T O R M A N U A L What’s in the Box 1. VLF-34E 2. Ground Stick with 20 ft. of ground wire 3. Green/Yellow Lead with Green Boot 4. 20ft. 2 AWG Cable 5.
Page 9: Operating Environment
O P E R A T O R M A N U A L Operating Environment Indoor/Outdoor-fair weather Case Lid Open – IPX0 Case Lid Closed IPX2 Altitude: 100% of rating;Sea-level, up to 5000ft.(approx.1500M). The output power is de-rated 10% above 5000 ft. altitude, 20% above 12,000 ft.( approx. 3600M), and 30% above 15,000 ft.(approx.
Page 10: Safety Symbol Identification
O P E R A T O R M A N U A L Safety Symbol Identification Warning! Please refer to documentation before operation Protective Earth Terminal Warning: Hazardous Voltage...
Page 11: Setting Up The Equipment
SETTING UP THE EQUIPMENT The setup of this equipment has been minimized by careful consideration of the operator during design. The VLF-34E single-piece construction and light weight lends itself to convenient portability for AC testing in the field. Select a location for the unit that will allow easy viewing of the control panel at a safe distance from the test object (within 20 ft.) on a level area.
Page 12: Important Note
O P E R A T O R M A N U A L Insert the EXT INTLK plug into the socket on the left side panel. plug may also be wired to a normally open contact of a safety switch for added protection.
Page 13: Operating The Equipment
O P E R A T O R M A N U A L Operating the Equipment This section provides step-by-step instruction on various test methods. Many facilities have their own in-house test procedures, and this manual is not to supercede these. The purpose of this section is to explain the capabilities of this test set in real-world applications.
Page 14 O P E R A T O R M A N U A L The shields of all cables must be securely tied to ground at the nearest end of the cable. Any conductors or wires in the cable or the vicinity not being tested must be grounded to avoid a buildup of charge and possible shock hazard.
Page 15 O P E R A T O R M A N U A L Line LED Indicates input power is present USB Data Transfer test results via USB flash drive to PC app for test report Save results directly, if USB flash drive is present while the test is performed Menu Selection Rotate the selector knob to scroll through menu items.
Page 16 O P E R A T O R M A N U A L Select new test setup to enter manual mode. Use the scroll knob to cycle through the test parameter options. Once your test is set to your parameters press start, top right button. The screen will turn yellow confirm your settings and press star again.
Page 17 O P E R A T O R M A N U A L Confirmation Screen Confirm test parameters Press Start (Round Blue Button top right of screen)
Page 18 Insert Xstick (green USB Thing) into USB port on your PC Install the xstick drivers, USB stick (red has HVINC Logo) with unit if asked for drivers Copy VLF-34E PC App exe file to your PC (it’s on the red USB stick) Open VLF-34E PC Application Click Wireless Configuration Button...
Page 19 O P E R A T O R M A N U A L Click Next...
Page 20 O P E R A T O R M A N U A L Click Begin After the wireless communication have been configured click next Click the Connect to VLF Button PC Application Uses Creating Test Profiles / Sequences Test Reports Live test monitoring Wireless Remote Control...
Page 21 O P E R A T O R M A N U A L Appendix A The Light Tree Terminal Block J5-5 and J5-6 is for an external interlock or a remote emergency off switch. J5-1 Light tree common J5-2 Light tree green normally open J5-3 Light tree yellow normally open J5-4 Light tree red normally open J5-5 Interlock or emergency off...
Page 22: Return Material
RETURNED MATERIAL If for any reason it becomes necessary to return any equipment or materials to High Voltage, Inc., the Service Department of High Voltage, Inc. must be notified, and authorization received, prior to the shipment of the equipment. When notified, the following information must be provided: MODEL: SERIAL NO:...
Page 23: Terms And Conditions
TERMS AND CONDITIONS AND LIMITED WARRANTY Rev. 102113 High Voltage, Inc., 31 County Route 7A, Copake, NY USA 12516 Phone: (518) 329-3275 Fax (518) 329-3271 E-mail: factory@hvinc.com THESE TERMS AND CONDITIONS OF SALE AND LIMITED which meet High Voltage’s full satisfaction, High Voltage in its discretion WARRANTY OF HIGH VOLTAGE, INC.
Page 24 American Arbitration Association then in effect, and judgment upon the award may be entered in any court have jurisdiction thereof; provided, however, that this clause shall not be construed to limit any rights which 1452.003\S:\High Voltage Inc\HVI Terms & Conditions 102113 - Page Numbers.pdf Page 2 of 2...
Page 25 Top AC Bucket Truck Tester 600 kVDC @ 5mA HVI Products 10/2015...