Muting Or Unmuting The Vpm220W - Huawei VPM220W User Manual

HUAWEI VPM220W Microphone Array
User Guide
Figure 2-2 VPM220W network
The VPM220W supports manual and automatic Wi-Fi connection.



2.5 Muting or Unmuting the VPM220W

The VPM220W has a
see
You can tap the


Issue 01 (2013-9-15)
Manual connection: When you use the VPM220W for the first time or move it outside
the connected Wi-Fi network range, the VPM220W automatically searches for an
available Wi-Fi network. After you manually connect the VPM220W to the Wi-Fi
network, you need to hold and press the
3 seconds and accept the connection request on the videoconferencing endpoint's remote
controlled UI or web interface. The VPM220W then performs the Wi-Fi Protected Setup
(WPS) Push Button Configuration (PBC) authentication with the videoconferencing
endpoint in order to obtain an IP address. During WPS PBC authentication, the three
microphone indicators blink blue in a clockwise direction.
Automatic connection: After the VPM220W first obtains an IP address, it automatically
reconnects after a restart.
button on top of the device. For details about the button position,
Figure 2-1.
button to mute or unmute the VPM220W in the following scenarios:
If you do not want to have your voice broadcast during a conference, you can tap this
button to mute the VPM220W. The three indicators then turn red.
If a participant wants to speak during a conference, you can tap this button to unmute the
VPM220W. The three indicators then turn blue.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
button on top of the VPM220W for at least
2 Installation
6