Performance & Sports Trike THE KMX KOLT THE KMX KOBRA THE KMX KOYOTE Assembly Instructions...
Page 2
When properly assembled and set up your KMX will provide many years of enjoyment. KMX Karts Ltd does its utmost to design and produce safe and fun products and so the utmost care has been used to ensure that your KMX is strong, safe and durable.
Page 3
Secure the brake and gear cables to the Steering Rod using 4 of the cable ties provided. (See Photo 8). 14. Kolt & Kobra Models - Position the seat on the frame. Slide the seat stays over the seat stay adjuster rods, insert the bolts into the middle hole of the adjusters and attach the washers and nuts provided but leave loose until final set up.
Page 4
14. Attach the pedals. Note that the left pedal has a left hand thread and the right pedal has a right hand thread. NOW GO TO TRIKE SETUP – PAGE 10. 15. Insert the Flag Pole into the flag holder. DRAWING 1.
Page 10
PHOTO 18 TRIKE SET UP SEAT AND BOOM ADJUSTMENT - KOLT AND KOBRA MODELS Slide the boom into the shortest position. By using the different hole positions in the seat stay adjusters and the sliding seat clamp you can adjust the angle and position of the seat on the frame.
Do not allow your KMX to be pulled by any other vehicle. KMX Karts Ltd, the suppliers of the KMX and/or the manufacturer do not accept any liability for any injury or any other damage sustained and any incurred costs as a result of (wrongfully and/or impropriate) use of the KMX .
Page 14
5.0 Maintenance Every time before you ride: Inflate tyres to correct pressure. Replace tyres if worn. Approx. time: 4 Test Brakes for correct operation. minutes. Check bolts on both seat and front boom to insure they are tight. Inspect tyres for damage. Every week: (in addition to above).
Date of Purchase: Type/Model KMX : Colour: Retailer KMX : Name: Address: Town/City: Postal-code: Country: Date of Birth: Signature purchaser: Send to: KMX Karts Ltd Unit E2, Knowle Village Business Park, Mayles Lane, Fareham, Hampshire PO17 5DY United Kingdom PAGE 15...
Need help?
Do you have a question about the KOLT and is the answer not in the manual?
Questions and answers