3.1
Overview
After inserting the Prestige in your computer and making the connections, turn on your computer.
Proceed to install the Windows driver for the Prestige. Screen shots for Windows 2000 are shown. Steps for
driver installation are similar unless otherwise specified.
3.2
Driver Installation
Follow the steps to install the device driver for the Prestige to work properly.
Step 1.
A Found New Hardware Wizard window displays. Click Cancel to close the wizard window.
Step 2.
Insert the supplied CD-ROM into the CD-ROM drive in your computer. The CD-ROM auto
runs and an AutoPlay Menu window displays as shown. (If no screen displays find and double-
click Open.exe on the supplied CD-ROM.)
Driver Installation
This chapter shows you step-by-step software installation using.
Save and close all programs before you begin.
Figure 3-1 Windows Found New Hardware Wizard
Prestige 610 ADSL PCI Modem
Driver Installation
Chapter 3
3-1
Need help?
Do you have a question about the Prestige 610 and is the answer not in the manual?
Questions and answers