Related Manuals for Tool-Temp MP-888
Summary of Contents for Tool-Temp MP-888
- Page 1 Guidance - Supplement to the manual of instructions Microprocessor Temperature Controller MP-888 software-version C30 06/2014 Version: 14...
-
Page 2: Table Of Contents
Guidance MP-888 - Supplement to the manual of instructions 2/10 General information This documentation is copyrighted. Unauthorised duplication is prohibited by law. To the best of our knowledge and belief, the information contained in this documentation is true and correct as of the date of publication. -
Page 3: Overview Mp-888
Guidance MP-888 - Supplement to the manual of instructions 3/10 1. Overview MP-888 Display of set value Display of actual value Flow control Display of the current flow in litres/min, English or American gallons/min. Up arrow Raise of set value... - Page 4 Guidance MP-888 - Supplement to the manual of instructions 4/10 Possible supply voltages (factory adjusted) Possible temperature sensor (factory adjusted) Version of the controller Temperature sensor connection Temperature sensor – note + / - 21+23 Pt-100 compensation Flow control – encoder signal...
-
Page 5: Overview Controller Programmes
Guidance MP-888 - Supplement to the manual of instructions 5/10 2. Overview controller programmes Once the „US-programs“ are set, the corresponding parameters are adjusted automatically on US- Gallons per minute and degree Fahrenheit. Temperature Control Units without flow control Programme... - Page 6 Guidance MP-888 - Supplement to the manual of instructions 6/10 P 88 P US 88 TT-388 / 48 kW, TT-608 Z TT-380 / 48 kW with flow control P 89 P US 89 TT-508 X, TT-510 X TT-500 with flow control...
-
Page 7: Selection Of The Controller Programme
Guidance MP-888 - Supplement to the manual of instructions 7/10 3. Selection of the controller programme By starting the controller, the software-version is first shown (C-30) and afterwards the programme number (P80). Each temperature control unit or water chiller requires a different programming of the parameters. -
Page 8: Parameter - Overview
Guidance MP-888 - Supplement to the manual of instructions 8/10 5. Parameter – Overview Function Factory adjusted Description Maximum Setting depends If the maximum temperature exceeds, on model temperature the heating and cooling are inactive and the maximum temperature LED lights up (0.0...400.0°C) - Page 9 Guidance MP-888 - Supplement to the manual of instructions 9/10 Setting depends Setting range FROM This temperature value limits the lowest on model temperature that can be adjusted. (-50.0...399.0°C) (-58.0...750.2°F) Setting depends Setting range TO This temperature value limits the highest on model temperature that can be adjusted.
- Page 10 Guidance MP-888 - Supplement to the manual of instructions 10/10 Setting depends Hysteresis cooling Period between ON and OFF of cooling. on model This value has to be adjusted correctly according to the controller adjustment (0.2...25.0°C) tables for temperature control units and (0.4...45.0°F)
Need help?
Do you have a question about the MP-888 and is the answer not in the manual?
Questions and answers
hello we are getting a fault code saying EEE on our display do you know how we could go about finding a way to fix this?