4.
Remove the touchscreen control board.
A circuit board that is >10 cm
above image. Follow local regulations for disposing this type of circuit board.
Removing the LCD Panel
1.
Remove the front bezel by following the procedure described on page 56.
2.
Disconnect the LCD LVDS cable from the scaler board. Refer to step 5 on page .35.
3.
Disconnect the inverter board cables. Refer to step 4 on page .41.
4.
For the Aspire Z3751and Z5751 models, remove the touchscreen control board by following the
procedure described on the previous section.
5.
Remove the screws securing the LCD panel.
Quantity
4
64
2
has been highlighted with a yellow rectangle as shown in the
Color
Torque
Chrome
4.5 +/- 0.3 kgf-cm
Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide
Part Number
86.1A524.5R0