Lenovo G8264 Product Manual page 5

SFP+ active direct-attach cables - 10 GbE
Lenovo 1m Active SFP+ DAC Cable
Lenovo 3m Active SFP+ DAC Cable
Lenovo 5m Active SFP+ DAC Cable
Lenovo 1m Active DAC SFP+ Cable (replaces 95Y0323)
Lenovo 3m Active DAC SFP+ Cable (replaces 95Y0326)
Lenovo 5m Active DAC SFP+ Cable (replaces 95Y0329)
QSFP+ transceiver and cables - 40 GbE
Lenovo 40GBASE-SR4 QSFP+ Transceiver
Lenovo 40GBASE-LR4 QSFP+ Transceiver
Optical cables for 40 GbE QSFP+ SR4 transceivers
Lenovo 10m QSFP+ MTP-MTP OM3 MMF Cable
Lenovo 30m QSFP+ MTP-MTP OM3 MMF Cable
Lenovo 10m QSFP+ MTP-MTP OM3 MMF Cable (replaces 90Y3519)
Lenovo 30m QSFP+ MTP-MTP OM3 MMF Cable (replaces 90Y3521)
QSFP+ breakout cables - 40 GbE to 4x10 GbE
Lenovo 1m Passive QSFP+ to SFP+ Breakout DAC Cable
Lenovo 3m Passive QSFP+ to SFP+ Breakout DAC Cable
Lenovo 5m Passive QSFP+ to SFP+ Breakout DAC Cable
QSFP+ direct-attach cables - 40 GbE
Lenovo 1m Passive QSFP+ DAC Cable
Lenovo 3m Passive QSFP+ DAC Cable
Lenovo 5m Passive QSFP+ DAC Cable
Lenovo 7m Passive QSFP+ DAC Cable
Benefits
The RackSwitch G8264 is considered particularly suited for these environments:
The G8264 supports several types of configurations: 1 GbE, 10 GbE, 40 GbE, vNIC, Converged Enhanced
Ethernet (CEE/DCB), NAS, and iSCSI.
The G8264 with SFP+ technology is the ideal solution for clients who are looking for low latency and low
power consumption.
The G8264 supports stacking for up to eight switches using a single switch image and configuration file that
shares one IP address and one management interface for simplified management.
The G8264 supports Data Center Bridging (DCB), the group of protocols from IEEE that provide lossless
Ethernet and that allow clients to reduce the costs of implementing either:
NAS or iSCSI convergence and priority-based flow control
FCoE by aggregating switch ports before connecting to more costly upstream Fibre Channel gateway
devices.
The G8264 can be configured in easy connect mode to allow for transparent and simple connectivity to the
upstream network, enabling easy connectivity to upstream Cisco, Juniper or other networks without having to
change those networks.
Lenovo is a leader in network virtualization, offering the on-switch VMready® software that reduces the
complexity of managing virtual machines (VMs) in the network. For more information, see VMready at:
http://www.ibm.com/systems/networking/software/vmready
The G8264 is SDN ready with its OpenFlow support. With OpenFlow, you can easily create user-controlled
virtual networks, optimize performance dynamically, and minimize complexity when used with an OpenFlow
controller.
RackSwitch G8264
95Y0323 A25A
95Y0326 A25B
95Y0329 A25C
00VX111 AT2R
00VX114 AT2S
00VX117 AT2T
49Y7884 A1DR
00D6222 A3NY
90Y3519 A1MM
90Y3521 A1MN
00VX003 AT2U
00VX005 AT2V
49Y7886 A1DL
49Y7887 A1DM
49Y7888 A1DN
49Y7890 A1DP
49Y7891 A1DQ
00D5810 A2X8
00D5813 A2X9
48
48
48
48
48
48
4
4
4
4
4
4
4
4
4
4
4
4
4
5