Using The Machinist Calc Pro 2; U.s./Metric Modes; Materials, Processes And Tools; Materials - Calculated Industries 4088 User Manual

175gr1

UsinG the MACHINIST CALC PRO 2

U.S. aND mETrIC mODE SETTINGS
The Machinist Calc Pro 2 allows you to set the calculator to
use either U.S. Mode or Metric Mode. The default setting is
U.S. units. You can change to Metric Mode by changing your
Preference setting (see page 65). The examples in this User's
guide are done in U.S. Mode.

maTErIalS, prOCESSES aND TOOlS

Materials

The Machinist Calc Pro 2 has 20 built-in Material types that
can be used to determine tabular Feed and Speed values.
You can scroll through the available Materials by repeatedly
pressing the N key, or by pressing the + key or -
key to scroll forward and backward through the Materials.
You can also enter the assigned number (see listing on next
page), then press the N key to select the Material, which
will be set until you select another Material or perform a Clear
All (g*).
0. No Material (Default)
1. 1020 Low-Carbon Steel
2. 1045 Medium-Carbon Steel
3. 1060 High-Carbon Steel
gOO
r1
0gr1
MeMorY
M-Ø1
MeMorY
M-Ø1
MeMorY
M-Ø1
User's Guide — 15
175.
0.
175.
0.
(cont'd)