Firmware Update; How To Check Versions Of Main, Dsp(1St To 3Rd), Hdmi And Video Fw - Onkyo TX-SR876 Service Manual

FIRMWARE UPDATE -1

How to Check Versions of Main, DSP(1st to 3rd), HDMI and Video FW

1. Press and hold down [DISPLAY] button, then press [ON/STANDBY] button when the unit is powered on.
The main microprocessor version will be displayed on FL display for about 3 seconds.
<e.g.>
M a in :
8 7 1 .0 1 /0 8 8 0 1 A
2. Press [Tone +] button while the version is displayed. Then, "DSP 1st SR9061:08611A" will be displayed.
Press [Tone +] button again while "DSP 1st SR9061:08611A" is displayed. Then, "DSP 2nd SR9062:08605C" will be
displayed. In this way, as [Tone +] button is pressed while a version is displayed, the next information will be displayed.
If [Tone -] button is pressed, the order will be reversed.
[Tone -]
Note:
These versions are the latest as of August 20, 2008.
M a in :
8 7 1 .0 1 /0 8 8 0 1 A
DS P 1 s t:
SR 9 0 6 1 :08 6 1 1 A
DS P 2 n d :
SR 9 0 6 2 :08 6 0 5 C
DS P 3 r d :
SR 9 0 6 3 :08 5 0 6 A
HDMI:
1 .0 1 /0 8 6 27 A
Vid e o :
0 8 7 0 3 E O
XM :
1 .0 0 /0 8 5 0 5 A
SIRIUS:
1 .0 0 /0 8 5 2 2 A
[Tone +]
Note:
In case of failure, Video FW cannot be reloaded.
Board replacement will be necessary for newer
video FW version.
Note:
XM and SIRIUS are only for North American models.
TX-SR876/SA876 TX-SR876/SA876