Towing The Mower - Dixie Chopper Zee 2 2348 Operation & Maintenance Manual

7.10 TOWING THE MOWER______________________________________________________

If the mower has a problem and can not drive to the service area, move the neutral release levers to the neutral position
and load the mower on a trailer. If a trailer is not available, tow the mower at a slow speed for short distances.
Be careful when you load or unload the mower on the trailer. Fasten the mower to the trailer to prevent the mower to
move on the trailer. Engage the parking brake.
If the trailer is moved on the highway, inflate the tires to the maximum pressure recorded on the tire before you fasten
the mower to the trailer. Decrease the tire pressure after the mower is removed from the trailer.
Move the neutral release levers (B) to the neutral position on
both drive axles before you tow the mower. The neutral
release levers lets the mower be moved without the engine
started and to prevent possible damage to the drive axles.
The neutral release levers (B) are located behind the drive
axles. Pull the levers toward the rear of the mower until they
can be lowered into the neutral position.
Before towing, disengage the parking brake and make sure
the cutting unit is lifted.
When you tow the mower, do not drive more than 2 mph
(3.2 km/hr). Dixie Chopper recommends that you do not
tow the mower for long distances.
When the mower gets to the service area, engage the parking brake, lift up and push the neutral release levers to the
operation position.
NOTICE
OPERATION 7
B
B
B
B
Operation
Neutral
Position
Position
en-32