Trouble Shooting - 3Bays GSA PUTT User Manual

Trouble Shooting

Q1: I can't pair my 3BaysGSA PUTT to my mobile.
For iOS users
A: If Bluetooth is disabled, please follow the procedures as below:
Steps
1) Search and download " GSA PUTT " from App Store.
2) When the 3BaysGSA PUTT device is in OFF mode, press & hold the power button for 4 seconds until Blue &
Red LED are alternating.
3) Enable the Bluetooth function of your iOS devices, Setting > General > Bluetooth ON
4) Find out the corresponding serial number from the scan list. You can check the serial number at the back of your
3BaysGSA PUTT device
5) After choosing the correct serial number, input "8888" password.
6) After successful pairing, please go back to GSA PUTT app.
7) You can test the connection by clicking " Connect Wizard " at the top left corner of home screen.
If Bluetooth is enabled, please make sure:
1) Blue & Red LED are alternating by pressing and holding power button for 4 seconds from OFF mode before
you start the pairing process.
2) You are not holding the pin of 3BaysGSA PUTT device during the pairing process.
14