Pulse Output; Basic Setup; Tag; Flow Units - Rosemount 8712 Reference Manual

Rosemount 8712

Pulse Output

Fast Keys 1, 1, 5

BASIC SETUP

Fast Keys 1, 3

Tag

Fast Keys 1, 3, 1
LOI Key XMTR INFO

Flow Units

Fast Keys 1, 3, 2
3-8
Stop Totalizer
Fast Keys 1, 1, 4, 6
LOI Key START/STOP
Stop totalizer interrupts the totalizer count until it is restarted again. This
feature is often used during pipe cleaning or other maintenance operations.
Reset Totalizer
Fast Keys 1, 1, 4, 7
LOI Key READ/RESET
Reset totalizer resets the net totalizer value to zero. The totalizer must be
stopped before resetting.
NOTE
The totalizer value is saved in the Non-Volatile memory of the electronics
every three seconds. Should power to the transmitter be interrupted, the
totalizer value will start at the last saved value when power is re-applied.
The Pulse Output displays the current value of the pulse signal.
The basic configuration functions of the Rosemount 8712 must be set for all
applications of the transmitter in a magnetic flowmeter system. If your
application requires the advanced functionality features of the Rosemount
8712, see Section 4 "Operation" of this manual.
Tag is the quickest and shortest way of identifying and distinguishing between
transmitters. Transmitters can be tagged according to the requirements of
your application. The tag may be up to eight characters long.
Flow Units set the output units for the Primary Variable which controls the
analog output of the transmitter.
Primary Variable Units
Fast Keys 1, 3, 2, 1
LOI Key UNITS
The Primary Variable Units specifies the format in which the flow rate will be
displayed. Units should be selected to meet your particular metering needs.
Reference Manual
00809-0100-4664, Rev BA
January 2010