Start Up Hdsdr - Icom IC-R8600 How-To Manual

About the HDSDR software operations
These instructions describe how to use the HDSDR software. Before reading this guide, please read "How to use
the IC-R8600 as an SDR receiver" that can be downloaded from the Icom website, for details on how to install the
software and connect a receiver to the PC.
http://www.icom.co.jp/world/support/
L These instructions are based on using:
• Microsoft ® Windows ®
• IC-R8600 USB I/Q Package for HDSDR ver 1.00
• HDSDR version 2.76
1. Turn ON the receiver.
2. Double-click HDSDR icon to start up HDSDR.
L When you use some ExtIO-DLL files, select "ExtIO_
ICR8600.dll" in the displayed screen.
1Select
Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
for the IC-R8600
10

Start up HDSDR

2Click
L If you use the RC-28
L The receiver automatically enters to the remote control
mode when the HDSDR software connects to the
receiver. In the remote control mode, you cannot operate
the receiver on its panel.
TIP: If the audio cannot be heard, push [F5] of the
PC's keyboard to display the Sound Card selection
screen, and then select the appropriate audio
device.
1
, see page 4.
remote encoder