Starting Off; Riding - Husqvarna TC 50 Owner's Manual

8 RIDING INSTRUCTIONS
Preparatory work
–
Raise the motorcycle with a lift stand. (
The motorcycle has been out of use for more than 1 week
–
–
Turn the knurled screw on the fuel tap all the way counterclockwise.
The engine is cold
(TC 50)
(TC 50 Mini)
–
Forcefully step on the kick starter, pushing it all the way forward.
Finishing work
–
Remove the motorcycle from the lift stand. (
8.3
–
Open the throttle carefully.
8.4
–
If the choke function was activated, deactivate it after the engine has warmed up.
–
After reaching maximum speed by fully opening the throttle grip, turn the throttle back so it is ¾ open. This
will barely reduce the speed but fuel consumption will be considerably lower.
– Your child should always open the throttle only as much as the engine can handle – abruptly opening the
throttle increases fuel consumption.
–
Your child should switch off the engine if longer periods of engine idling or standing still are expected.
Guideline
≥ 2 min
24
Info
If the motorcycle is unwilling to start, the cause can be old fuel in the float chamber. The flammable ele-
ments of the fuel evaporate after a long time of standing.
If the float chamber is filled with fresh fuel, the engine starts immediately.
Empty the carburetor float chamber.
Fuel can flow from the fuel tank to the carburetor.
–
Pull the choke knob fully out and turn it by max. ¼ turn.
–
Push the choke lever up all the way to the stop.
Info
Do not open the throttle.

Starting off

Info
The plug-in stand must be removed before riding.

Riding

Info
If unusual noises occur while riding, stop immediately, switch off the engine, and contact an authorized
Husqvarna Motorcycles workshop.
p. 43)
p. 43)