Wallpaper For W56H Handset - Yealink W60P Administrator's Manual

Note: It will take effect on all handsets that are registered on the same base station. It
works only if the value of the parameter "auto_provision.handset_configured.enable" is set
to 1 (Enabled).
Web User Interface:
None
Handset User Interface:
OK->Settings->Display->Display Backlight->In Charger
custom.handset.backlight_out_of_charger.enable
Description:
Enables or disables the handset to always turn on the backlight when it is not in the
charging state.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the backlight will be turned off after the handset is idle for a
period of time when it is not in the charging state.
Note: It will take effect on all handsets that are registered on the same base station. It
works only if the value of the parameter "auto_provision.handset_configured.enable" is set
to 1 (Enabled).
Web User Interface:
None
Handset User Interface:
OK->Settings->Display->Display Backlight->Out Of Charger
To configure the backlight via handset user interface:
Press OK to enter the main menu.
1.
Select Settings->Display->Display Backlight.
2.
Press or
3.
Press or
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.

Wallpaper for W56H Handset

Wallpaper is an image used as the background of the handset idle screen. Users can select an
image from handset's built-in background. It is only applicable to W56H handset.
Procedure
Wallpaper can be configured using the following methods.
Configuratio
to select the desired value from the In Charger field.
to select the desired value from the Out Of Charger field.
y000000000077.cfg
Configuring the Handset
0 or 1
Configure the wallpaper displayed on
0
127