Page 2
Read this manual carefully before using the product and follow the instructions and recommendations included herein. Refer to ctrl4.co/ds2mini for full documentation on this IP intercom. What you need for mounting LAN connection, Cat5e or higher UTP cable with RJ-45 connector PoE 802.3af or 12VDC/2A power supply Installation procedure Choose an installation site easily accessible to users.
Page 3
Door lock connection–Either connect the electric lock to the Active output, which also provides power, or switch the external power supply using a relay. In either case, we recommend that you to use low-power locks and keep the above-mentioned maximum values.
Page 4
Follow the principles below while cleaning: Do not use aggressive detergents (such as abrasives or strong disinfectants). Use appropriate cleaning agents (suitable for glasses, optical devices, screens, etc.) for lens cleaning. Alcohol-based cleaners should not be applied. Clean the device in dry weather in order to make waste water evaporate quickly.
Page 5
Protocol Signalling protocol: SIP 2.0 (RFC-3261) Buttons Button with white backlight and easily removable label Audio Microphone: 1 built-in microphone Speaker: 2W, 4 ohm Sound pressure at 1 kHz at 1 m distance: 78 dB Audio stream ...
Page 6
Mechanical properties Operating temperature: -40°F to 140°F (-40°C to 60°C) Storage temperature: -40°F to 158°F (-40°C to 70°C) Operating relative humidity: 10% to 95% (non-condensing) Officially certified outdoor coverage level: IP54, IK08 Dimensions Frame for surface installation – 1 module: 107 x 130 x 28 mm (4.21 x 5.12 x 1.10 inches) ...
Page 8
Control4 Corporation 11734 South Election Road Salt Lake City, UT 84020 2294v1...
Need help?
Do you have a question about the DS2 MINI and is the answer not in the manual?
Questions and answers