Sharp SH8010C User Manual page 36

G - O : Long press to input corresponding Chinese
character displayed in the candidate field.
P :
Long press to enter tones "
mode.
R :
Long press to display the Input Language screen.
Changing the Input Method between Stroke and PinYin
See "Changing the Input Method" on page 33.
Using Stroke Mode
The following is an example of entering "
1. Change the input mode to T9 Stroke mode.
2. Press I G J to display the
corresponding stroke for "
3. Long press the corresponding key to
complete the selection (in this case
M).
" in T9 PinYin
".
".
Using PinYin Mode
Input field
Long press the corresponding
numeric key to select the desired
character directly from the
candidate field.
Candidate field
The following is an example of entering "
1. Press K for the first letter of the
reading, then highlight "l".
2. Press J for the vowel of the first
letter, then highlight "li".
Characters with the same reading are
displayed in the candidate field.
3. Long press corresponding numeric key to enter the desired
character (in this case, H).
".
Entering Characters 35