Operation - viveroo loop User Manual

Operation

oop It! 90° Rotation
Functions l
A recessed handle is created by applying gentle pressure on the
loop button. Now you can easily spin the loop from horizontal to
vertical and back again with just the touch of a finger.
To go from vertical to horizontal format, spin the loop to the left.
From horizontal to vertical, spin the loop to the right.
Thanks to the SoftClose function, loop will automatically complete
the rotation just before reaching its final resting position.
Click It! Opening the iPad shelf
Open the iPad resting shelf by using the loop button.
! IMPORTANT: The iPad must be in vertical position.
! IMPORTANT: loop must be installed vertically to open the resting
shelf, i.e. wall. - the suspension of the resting shelf has been set
to this position. For horizontal (i.e. table) or diagonal (i.e. lectern,
teacher's desk, control panel) installation, special adapter sets are
available on request.
Cleanse your loop as needed with a soft micro fiber cloth and clear
Care and
water only. Dampen the micro fiber cloth and wipe the surfaces
Cleansing
gently. If necessary, you may remove the rubber pads (see
„Installation").
The glass surfaces of DeepBlack and ClearWhite may also be
cleaned with standard glass cleaners.
! WARNING: The interior of the loop must remain dry. To ensure
this, use only a damp cloth for cleansing.
! WARNING: Never scratch, scrape or scrub loop surfaces with
abrasive materials.
!