Nexwave; Electrode And Lead Wire Setup - Zynex Medical NexWave User Manual

Step 1 Open electrode package and remove electrodes from package. Keep
electrodes on plastic backing.
Note: Only Zynex Medical electrodes are approved for use with the
NexWave. P/N 300027 are provided standard. Sterile electrodes, P/N
300100, are optionally available (for U.S. only). See additional accessories
on page 43.
Electrode Connector
Step 2 Insert lead wire pin connectors into electrode connectors as shown below.
RED lead wire connectors on one side and BLACK lead wire connectors on
the other side.
9

NexWave

Electrode and Lead Wire Setup

IFC modality requires all 4 electrodes
(2 channels)
TENS and NMES modalities can use 2
electrodes (1 channel) or 4 electrodes
(2 channels)
Plastic Backing
Electrode