Disable / Re-Enable Alarm Devices - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: -
9

Disable / Re-enable alarm devices

25
All outputs programmed for sounders (type Alarm devices) can via
menu H2/B9 be collectively disabled. This is indicated by LED
"Disablements" (L8) and LED Fault / Disablements "Alarm devices"
(L13) steady (continuous).
NOTE! They will remain disabled until they are re-enabled again via
menu H2/B9.
32
EBL128 Operating Instructions V2.0.x