Ipv6 Terminology - HP 2520-8 Configuration Manual

IPv6 Terminology

DAD Duplicate Address Detection. Refer to "Duplicate Address Detection (DAD)"
Device Identifier The low-order bits in an IPv6 address that identify a specific device. For
DoS Denial-of-Service.
EUI-64 Extended Unique Identifier. Refer to "View the Current IPv6 Addressing
Manual Address
Configuration
MTU Maximum Transmission Unit. The largest frame size allowed on a given path
RA Router Advertisement. Refer to "Router Access and Default Router Selection"
SLAAC Stateless Address Autoconfiguration.
Static Address A permanently configured IPv6 address, as opposed to an autoconfigured
Static Address
Configuration
on page 1-14.
example, in the link-local address 2001:db8:a10:101:212:79ff:fe88:a100/64, the
bits forming 212:79ff:fe88:a100 comprise the device identifier.
Configuration" on page 1-17.
Configures an IPv6 address by using the CLI to manually enter a static address.
Referred to as "Static Address Configuration" in this guide. See Static
Address Configuration, below.
or device.
on page 1-23.
address.
Configures an IPv6 address by using the CLI to manually enter the address
instead of using an automatically generated or DHCPv6-assigned address.
Same as "Manual Address Configuration". See also Manual Address Config-
uration, above.
A
A-1