Engine Oil Change - Honda FJ500 Owner's Manual

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Pull up the handlebar while holding it to contact the front end of the
tiller to the ground.
2. Place a suitable container below the engine to catch the used oil,
and then remove the engine oil filler cap/dipstick, drain plug, and
sealing washer.
3. Allow the used oil to drain completely, and then reinstall the drain
plug and a new sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change oil your own, please dispose of the used oil properly.
Put it in a sealed container and take it to a recycling center. Do not
throw it in the trash, pour it on the ground, or pour it down a drain.
With the tiller in a level position (see page 46), fill with the
4.
recommended oil to the outer edge of the oil filler hole
(see below)
DRAIN PLUG
SERVICING YOUR TILLER
ENGINE OIL FILLER CAP/DIPSTICK
UPPER LIMIT
47