Troubleshooting - Rosco Dual-Vision XC4 Installation & Operating Instructions Manual

Troubleshooting

LCD display is dark.
Power No chime heard upon
starting vehicle.
LCD display is faint, but
LCD
chime heard upon
Display
starting vehicle.
Event icon is
Event
constantly lit.
Speed Constant chiming
GPS icon remains unlit
while driving, vehicle
GPS
speed not indicated on
LCD display
LCD
Message
LCD
Message
Playback Blurry video
Low/Choppy Video
Playback
Framerate
Playback
No chime or
Speaker
loud chime
Problem Possible Cause
No power to Recorder
Constant Events and
chimes due to bumps
Threshold set too low
GPS antenna is not
ErrX
SD_E
No audio
Configuration screens
Low brightness
setting
and potholes
Speed Event
able to acquire
satellite signal
Error notices on
display
SD Card error
No SD Card, SD
Card not
reading/writing
Camera/lens
problem
OR
Low Video Quality
Setting
Low Frame Rate
Setting
Improper software
settings in Player or
Improper setting in
DV-Pro5
Configuration Menu
Corrective Action
Check the power cable connection
and fuses
Open Configuration screen in DV-
Pro5 and adjust Backlight
Day/Night Settings
Increase G-Sensor settings
based on your vehicle types and
needs.
Increase Speed limit threshold
based on your vehicle needs.
Relocate Recorder and
mounting base to position with
line-of-sight to sky
Contact your dealer or Rosco for
Assistance
Remove and properly insert
SD card OR
Reformat or replace
SD Card
Make sure Camera/lens is clean
and clear of obstructions
AND/OR
Increase video quality in DV-Pro
Configuration
Increase frame rate in DV-Pro
Configuration
Configuration - Ch1 has no
audio but you can set Audio
Volume level for each Ch2, Ch3,
Ch4 cameras thru DV-Pro5
configuration menu
DV-Pro5 Player – adjust
Volume Control slider as
desired.
Check speaker settings on PC
Adjust the
Speaker Volume setting in the
DV-Pro5 configuration menu.
37