Related Manuals for BCP 800W Folding Treadmill
Summary of Contents for BCP 800W Folding Treadmill
- Page 1 800W Folding Treadmill SKY 3123 customerservice@ bestchoiceproducts.com 1 844.948.8400 bestchoiceproducts.com ASSEMBLY MANUAL Please keep this manual for future references as it contains important information.
- Page 2 NOTICE Thank you very much for choosing Best Choice Products! Please read 1 PERSON 45 MIN ASSEMBLY ASSEMBLY the installation instructions carefully before installing. - Firmly secure all screws before use. - Product is intended for indoor use only. - If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
-
Page 3: Parts & Assembly
Caution During Use and Safety Cont. - Do not start the machine when it is folded. - Keep water away from the machine, motor, power line, and plug. - Do not use this machine in enclosed spaces or areas without air circulation. - Do not place any objects on the machine. - Page 4 STEP 1: Use two part 5 screws, one part 3 washer, STEP 2: Use two part 5 screws and two part 10 and one part 10 pad to attach one side of the sup- pads to attach the handrail to the support frame. port frame to the base of the treadmill.
-
Page 5: Display Monitor
Display Monitor Press “START” to power on the treadmill. After 3 sec- onds the treadmill will begin operation at .6 miles/hour. Press the “+” key to increase speed, and the “-“ key to decrease speed. The max speed is 7.5 miles/hour and the minimum speed is .6 miles/hour. - Page 6 Folding & Maintenance Fold: - Loosen the part 6 knob and lift up on the running board to fold the treadmill. - Secure the frame to the running board by tightening the part 1 knob on the left handrail. Unfold: - Release the tension on the part 1 knob and unfold the treadmill.
-
Page 7: Troubleshooting
Troubleshooting 1) Running belt deviates to the left - Start the treadmill at 1-1.5 miles/hour. - Use the provided hex key to turn the screw on the back left of the machine clockwise. - Let the machine run for 1 to 2 minutes and adjust as necessary until the belt is in the center of the running board. - Page 8 LEARN MORE! Email us, we’re here 7 days a week to help you! customerservice@bestchoiceproducts.com WARNING Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
Need help?
Do you have a question about the 800W Folding Treadmill and is the answer not in the manual?
Questions and answers
How do I fix the loose Belt on my treadmill.
To fix a loose belt on the BCP 800W Folding Treadmill, use the provided hex key to turn both screws on the back of the machine clockwise until the issue is resolved.
This answer is automatically generated
what causes E05 on the 800w treadmill
The E05 error on the BCP 800W Folding Treadmill is caused by overcurrent protection.
This answer is automatically generated