Summary of Contents for Signet FC50K-CC
- Page 1 EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. EV DC FAST CHARGER Manual FC50K-CC v.03...
- Page 2 When devices are used for applications with technical safety requirements, the relevant instructions must be followed. Failure to use Signet systems software or approved software with our hardware products may result in injury, harm, or improper operating results.
-
Page 3: Table Of Contents
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. INDEX Page Section Description IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------------------ 1. INTRODUCTION ----------------------------------------------------------------------- 2. APPLICATION ----------------------------------------------------------------------- 3. RECEIVING THE CHARGER -------------------------------------------------------------- 4. STORAGE -------------------------------------------------------------------------------- 5. MOVING AND TRANSPORT ------------------------------------------------------ 6. GENERAL CHARACTERISTICS ------------------------------------------------------ 7. MECHANICAL CHARACTERISTICS 7-1. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS : This manual contains important instructions for the Signet DC Fast Chargers that shall be followed during installation, operation and maintenance of the unit. 2. Read the instructions carefully and become familiar with the equipment before attempting to install, operate, or maintain it. - Page 5 EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. WARNING: Do not place the charger on or near a flammable object while in use. Keep away from carpets, cluttered workbenches, etc. WARNING: Do not cover the air intake holes on the charger as this could cause the charger to overheat.
-
Page 6: Introduction
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 1. INTRODUCTION ‘FC50K-CC’ Thank you for purchasing this charger. We are sure you will be pleased with its performance and features. In order to ensure that you obtain the maximum from its operation, please read the following instructions carefully. -
Page 7: General Characteristics
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 6. GENERAL CHARACTERISTICS Type CHAdeMO + SAE COMBO Model FC50K-CC 680D x 780.4W x 1129H (mm) Mechanical Max. Size, Weight *ADA Compliant 3phase 4wire, AC 380 ~ 480V (Fundamental) Voltage 3phase 3wire, AC 200 ~ 280V (Optional) -
Page 8: Mechanical Characteristics
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 7. MECHANICAL CHARACTERISTICS 7-1. Dimensions... - Page 9 EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. NOTE 1. Material: SUS 2. Surface: Silver and Black power spray 3. Front Surface Color: White 4. About Net Weight: 180 kg 5. Optional - Input Cable - Output Charging Plug (CHAdeMO)
-
Page 10: Inside/Outside View
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 7-2. Inside/Outside view [3-Phase 3-Wire] [FRONT VIEW] [REAR VIEW] [AC TERMINAL DETAIL] Parts Name Parts Name Module Case AC Input BUSBAR (R,S,T) 7" Touch Screen AC Terminal BLOCK RF Card Reader Main Control Board... - Page 11 EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. [3-Phase 4-Wire] [FRONT VIEW] [REAR VIEW] [AC TERMINAL DETAIL] Parts Name Parts Name Module Case AC Input BUSBAR (R,S,T,N) 7" Touch Screen AC Terminal BLOCK RF Card Reader Main Control Board Emergency Switch...
-
Page 12: Block Diagram
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 8. BLOCK DIAGRAM... -
Page 13: Installation
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 9. INSTALLATION 9-1. Location 1) For the best operating conditions and longest life, please take care in selecting an installation site. Operating life and performance will be influenced by charger location. It is recommanded not to be exposed high temperatures, dust,corrosive fumes, combustible materials, or explosive gases. -
Page 14: Wiring Procedure Standard Dc Fast Charger
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 9-3. Wiring procedure standard DC fast charger The wiring connection of this Fast Charger shall be made with the following 1) Make sure the wiring breaker (MCCB or ELCB) for the AC power supply is OFF. -
Page 15: Charging Operation
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 10. Charging operation DANGER: TO PREVENT ELECTRICAL SHOCK, DO NOT TOUCH UNINSULATED PARTS OF THE CHARGER DC OUTPUT CONNECTOR, BATTERY CONNECTOR, OR BATTERY TERMINALS. MAKE SURE ALL ELECTRICAL CONNECTORS ARE IN GOOD WORKING CONDITION. DO NOT USE CONNECTORS THAT ARE CRACKED OR CORRODED TO MAKE ADEQUATE ELECTRICAL CONTACT. -
Page 16: Prepare For Test Run
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 10-3. Prepare for test run ① Rear door open -Unlock the door with key provide ② Switch ON control power disconnecting device - Switch ON control power disconnecting device located on the bottom right. -
Page 17: Start Charging
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 10-7. Start Charging Network Mode Default Mode Mobile app RFID Auth... -
Page 18: Stop Charging
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 10-8. Stop Charging Network Mode Default Mode Mobile app RFID Auth... -
Page 19: Error Situation
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 10-9. Error Situation - If a problem occurs with charger or electric vehicle in the middle oh charging, immediately stop charging and mark the problem and Fault code. - When an error occurs, identify the problem and then detach connector from vehicle to put it back to the original position. -
Page 20: Maintenancy
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 11. MAINTENANCE READ FIRST: There is important safety information throughout this document. Read ‘Important Safety Instruction’ on page 4 before attempting any owner maintenance or trouble shooting. 11-1. Checking filter and Replacement ELECTRIC SHOCK!: Risk of electric shock. -
Page 21: Order Of Replacing Module
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 11-3. Order of Replacing Module ELECTRIC SHOCK!: Risk of electric shock. Capacitor stores hazardous energy. Do not open back door of charger until 5 minutes after disconnecting all source of supply. WARNING: Make sure turn off the power to the charger before performing any maintenance procedures. -
Page 22: Assembly Of Module
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 11-4. Assembly of Module - Assembly of module could be done in reverse order of dismantlement. WARNING ELECTRICAL Special cautions are required when you assemble module. If there is a mistake in assembly, there is risk of fire. - Page 23 EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. Charger output does not follow the Battery error (current difference) Try reset, then call customer service charging request value of the vehicle Battery error(temperature) High battery temperature of Vehicle Try reset, and then call vehicle service.
-
Page 24: Warranty
EV DC FAST CHARGER MANUAL SIGNET SYSTEMS Inc. 12. Warranty Warranty terms: All the equipment and parts proposed herein will be guaranteed by the SELLER against defects of materials and workmanship for a period of 12 months from the date of the installation”. In no event shall SELLER be liable for any defects of PRODUCTS if they are arising out of any of the following causes:(i) Improper operation and/or maintenance by BUYER and/or OWNER;(ii) Operation outside the specifications or requirements provided by...
Need help?
Do you have a question about the FC50K-CC and is the answer not in the manual?
Questions and answers