To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by LocknCharge. is limited to the cost of repairing or replacing the failed product or component at the discretion of LocknCharge...
INSTRUCTION MANUAL Overview. The LocknCharge iQ 16 Sync Charge Box (iQ 16 SCB) is a compact and portable robust sync and charge station that provides high current charging and synchronisation capability for up to 16 iPad devices. Designed specifically to supply the maximum charge capability of up to 2.1A for the iPad/ iPad2 device, this unit is also available for other devices on request.
3. Ensure the iQ 16 SCB power-switch is OFF and the mains power outlet is switched OFF. 4. Insert the power cord into the iQ 16 SCB, and plug the other end into the mains power outlet. Switch the mains power outlet ON. www.lockncharge.com...
INSTRUCTION MANUAL How to charge multiple devices. 1. Connect all the devices required to be charged to the iQ 16 SCB USB sockets using only approved USB cables. The devices may be connected to any of the USB sockets, in any order and any sequence.
In the event that a defect, malfunction or failure occurs or is discovered during the warranty period, LocknCharge will repair or replace, at its option, the products which in the reasonable judgment of LocknCharge are deemed defective. Replacement products or parts used may be new or refurbished and may show signs of use but be otherwise fully serviceable and covered by the remainder of the Warranty Period.
Responsible Party: Lock and Charge USA Inc, 307 6th St. W. West Fargo, ND 58078-1533, (701) 630-9357, info@lockncharge.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the iQ 16 SCB Sync Station and is the answer not in the manual?
Questions and answers