Notes On Lead Dressing - Pioneer PDP-5020FD Service Manual

5

Notes on Lead Dressing

Note: The wiring shown in the photo is different from the actual wiring, because the product in the photo is a prototype.
Upon servicing, be sure to restore the original wiring of the unit after repair work.
The J101 and J102 cables require correct orientation for
connection. Connect the connectors with white tape to the
POWER SUPPLY Unit.
Tape (white)
J102
P2
J101
P1
Around the periphery of the Multibase, the J111 cable
wires (black and white) must be bound lastly then be
dressed so that they pass over other cables.
POWER SUPPLY Unit
J111 (black and white)
P5
Dress so that J111 passes over other cables.
Dress the J111 so that it passes under other cables.
The J215 cable must be passed over the J118 cable.
J215 J118
IO6
Pass J215 over J118.
5
6
POWER SUPPLY Unit
PC Assy
PC1
IO5
PDP-5020FD
6
7
When removing the POWER SUPPLY Unit, be sure to
remove not only the POWER SUPPLY Unit but entire PCB
base.
Dress the J118 cable so that it passes over other cables.
J118 Dress the J118 so that it passes
over other cables.
How to remove the newly adopted wire saddle
from the chassis
1
Push
7
8
POWER SUPPLY Unit
PCB base
2
Pull out
151
8
A
B
C
D
E
F