Accessories; Cuvettes In Spectramax M2 And Spectramax M2 - Molecular Devices SpectraMax M2 User Manual

A. Appendix
A.2.
A.3.
SpectraMax M2 & SpectraMax M2e Multi-mode Plate Readers User Guide — 0112-0102 Rev. D
52

ACCESSORIES

SpectraTest ABS1 Absorbance Validation Test Plate
SpectraTest FL1 Fluorescence Validation Test Plate
Cuvette Absorbance Validation Kit
SpectraPlate-Quartz UV-transparent microplate
Fuse, 4-amp Time Delay
Fuse, 4-amp (5 x 20 mm) Time Delay
Power Cord (US, Canada, Japan, Mexico, India)
Power Cord, EC1 (Germany, France, Scandinavia, Italy, Korea)
Power Cord, EC2 (UK, Indonesia, Singapore, Malaysia)
Power Cord, AP1 (Australia, Hong Kong, China)
Cable, RS-232, 8-pin DIN to 8-pin DIN (instrument to pre-G3 Macintosh)
Cable, RS-232, 9-pin DIN to 8-pin DIN (instrument to PC serial port)
Adapter USB-Serial High-Speed (KeySpan adapter; instrument to USB-only

CUVETTES IN SPECTRAMAX M2 AND SPECTRAMAX M2

The guidelines for cuvette use in the SpectraMax M2 and SpectraMax M2
as those that apply to any high-quality spectrophotometer. The user must ensure that the
meniscus is comfortably above the light beam in standard cuvettes and that the sample
chamber in a microcuvette is aligned properly with the beam. The light beam is 0.625 in
(15.87 mm) above the cuvette bottom.
Below are some cuvettes that have been tested. All have an optical pathlength of 1 cm
(10 mm) and standard external dimensions (12.5 cm x12.5 cm). Their fill volumes differ
only because of their different internal width and chamber height dimensions.
Description
SpectraMax Mouse Pad
instrument)
Test Tube Cover
Part #
0200-6117
0200-5060
9000-0161
R8024
4601-0013
4601-0014
4400-0002
4400-0036
4400-0037
4400-0038
9000-0133
9000-0091
9000-0149
9000-0938
2300-0277
e
e
are the same