Comparison Table Of Self-Diagnosis Display And Code - Panasonic PT-DZ12000U Service Manual

PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
Self-
diagnosis
display
FE1 Fan error 1: P-UNIT FAN
FE2 Fan error 2: LAMP FAN 1
FE3 Fan error 3: LAMP FAN 2
FE4 Fan error 4: LAMP FAN 3
FE5 Fan error 5: LAMP FAN 4
FE6 Fan error 6: BALLAST1 FAN
FE7 Fan error 7: BALLAST3 FAN
FE8 Fan error 8: GB-DMD FAN
FE9 Fan error 9: EXAUST FAN C
FF0 Fan error 10: EXAUST FAN L
FF1 Fan error 11: EXAUST FAN R
FF2 Fan error 12: R-DMD FAN
FF3 Fan (Module) error 13: G-LIQUID
COOLING
FF4 Fan (Module) error 14: B-LIQUID
COOLING
FF5 Fan error 15: C-PRISM FAN
FF6 Fan error 16: L-PRISM FAN
FF7 Fan error 17: BALLAST2 FAN
FF8 Fan error 18: BALLAST4 FAN
FF9 Fan error 19: G-PRISM FAN
F11 Shutter error
F12 Dynamic iris error
F13 Air filter unit error
F21 2.5 V DC error
F22 3.3 V DC error
F23 5.0 V DC error
F41 Lamp 1 memory error
F42 Lamp 2 memory error
F43 Lamp 3 memory error
F44 Lamp 4 memory error
F61 Lamp 1 ballast communication
error
F62 Lamp 2 ballast communication
error
F63 Lamp 3 ballast communication
error
F64 Lamp 4 ballast communication
error
F80 Resize IC setting error
F81 FM-R test fail
F82 FM-G tset fail
F83 FM-B test fail
F91 FPGA1 configuration error
F92 FPGA2/3 configuration error
F93 Flash ROM error
F94 RAM error
F95 FPGA expansion error
F96 Lens shift error
F97 WF-Module (GEOMETRY)
communication error
Explanatory notes of shutdown column
Shutdown occurs.
Shutdown does not occur.
*1 Shutdown occurs only when starting. (Shutdown does not occur even if the temperature becomes less than 5°C during normal
operating.)
*2 Shutdown occurs when all lamps cannot be lit.
5.2.

Comparison Table of Self-diagnosis Display and Code

Self-diagnosis
display
U11 00000000 00000000 00000000 00000001
Contents Shutdown
*2
*2
*2
*2
*2
*2
*2
*2
Code
Display condition
The fan stops for 5 seconds or longer.
Shutter error
Dynamic iris error
Air filter cleaning processing time-out
2.5 V DC error
3.3 V DC error
5.0 V DC error
Lamp EEPROM is abnormal.
Fails in the communication with the ballast
MPU.
No response from the resize IC
RDRAM test error
A-P.C.Board is abnormal.
FH-Module is abnormal.
WF-Module is abnormal.
The circuit around CPU on A-P.C.Board is
abnormal.
The circuit for lens position detection is
abnormal.
No response from the geometry IC
Self-diagnosis
display
FE4 00000000 00000000 00080000 00000000
16
Remarks
Power unit fan
Lamp fan 1
Lamp fan 2
Lamp fan 3
Lamp fan 4
Ballast fan 1
Ballast fan 3
GB-DMD fan
Exhaust fan (C)
Exhaust fan (L)
Exhaust fan (R)
R-DMD fan
Liquid cooling pump (G)
Liquid cooling pump (B)
Color prism fan
Lamp prism fan
Ballast fan 2
Ballast fan 4
G-prism fan
LAMP monitor blinks 3 times in
red.
Displays in
PT-DZ12000*/DW100* only.
Code