EarthQuake Victory Operator's Manual page 17

Change Forward/Reverse Belt: SEE FIGURES 12&13.
1. Turn off engine. Engine must be cool.
2. Remove spark plug wire and secure from spark plug.
3. Remove belt guard.
4. Remove the forward belt from the forward engine pulley:
a. Gently pull the engine recoil rope to rotate the pulley.
With the pulley turning, force the forward belt out of
the V-groove.
b. Slide the belt free of the engine pulley.
c. Pull the forward belt down and out of the way.
5. Remove the reverse belt from the reverse engine pulley:
a. Gently pull the engine recoil rope to rotate the pulley.
With the pulley turning, force the reverse belt out of
the V-groove.
b. Slide the belt free of engine pulleys and reverse belt
guides.
c. Pull belt down and away from transmission pulley.
6. Install new reverse belt:
NOTE: V side of belt should be up, away from pulley.
a. Thread belt up from bottom.
b. Place belt around transmission pulley in groove.
c. Place belt under reverse belt guides.
d. Gently pull engine recoil rope while forcing the belt
over the edge of the engine pulley into the V-groove.
7. Install new forward belt:
a. Place forward belt in transmission pulley groove.
b. Gently pull the engine recoil rope to rotate the pulley
while forcing the forward belt into the V-groove.
8. Replace belt guard.
9. Attach spark plug wire.
BELT REPLACEMENT PART #'S:
• 22773 (forward)
• 24995 (reverse)
For additional information email info@ardisam.com or call 800-345-6007 M-F 8-5
FIGURE 12
TRANSMISSION
PULLEY
FIGURE 13
Operator's Manual
Rototiller Victory
GUARD BOLT
BELT GUARD
ENGINE PULLEY
FWD BELT GUIDE
FORWARD BELT
17