Ridesense Maintenance; Replace Battery - Giant RIDESENSE User Manual

Warning: Pull RIDESENSE vertically upward from its installation location may
damage the RIDESENSE or the frame and breach your warranty terms.

RIDESENSE maintenance

1. Replace battery

Note: Check remaining power of your battery before riding your bike ride. Low
battery may lead to RIDESENSE sensor error or pairing failure.
Note: Wait 30 seconds for the RIDESENSE to reset after its battery was removed
to ensure its successful operation after battery replacement.
Note: Remove the battery from your product in case it will not be used for long
time. This will prevent the sensor from damage by leak of battery electrolyte.
Warning: Insert a battery in the battery compartment before locking the battery
cover with screw. Make sure edge of the battery cover is well placed or the
battery cover may fail to seal closely, the battery compartment spring may fail, or
the waterproof function may get lost. (Please refer to installation steps given
earlier.)