Table of Contents
Advertisement
7. REPLACEMENT OF LAMP, LAMP CAP AND LAMP COVER
Turn the switch off and remove the Battery [8] before replacement (Fig. 2).
7-1. Replacement of Lamp [3]
(1) Remove the Lamp Cover [1] by tuning it counterclockwise in C direction (Fig. 3).
(2) Remove the Lamp Cap [2] at the tip of the Lamp [3] and pull out the Lamp [3] (Fig. 1).
(3) Securely insert the new Lamp [3] and reinstall the Lamp Cap [2] to the tip of the new Lamp [3] (Fig. 1).
(4) Reinstall the Lamp Cover [1] by turning it clockwise in D direction without twisting the Lamp Cap [2]. If the
Lamp Cap [2] is twisted, check whether the Lamp [3] is properly inserted or not again.
* The Lamp Cap [2] is provided at the tip of the Lamp [3] to prevent breakage of the lamp in case of accidental
drop of the Model UB 12DL. Be sure to reinstall the Lamp Cap [2] to the new Lamp [3].
7-2. Replacement of Lamp Cover [1]
(1) Remove the Lamp Cover [1] by tuning it counterclockwise in C direction (Fig. 3).
(2) Install the new Lamp Cover [1] by turning it clockwise in D direction without twisting the Lamp Cap [2].
7-3. Replacement of Lamp Cap [2]
(1) Remove the Lamp Cover [1] by tuning it counterclockwise in C direction (Fig. 3).
(2) Remove the Lamp Cap [2] at the tip of the Lamp [3] and install the new Lamp Cap [2] to the tip of the Lamp
[3].
(3) Install the new Lamp Cover [1] by turning it clockwise in D direction without twisting the Lamp Cap [2].
[6]
[7]
[8]
8. SPARE PARTS
The spare parts for the Model UB 12DL are as follows.
(1) Lamp
(2) Lamp cover
(3) Lamp cap
[1]
[2]
[8]
[3]
[4]
[5]
[9]
[9]
[1]
--- 6 ---
[1] Lamp Cover
[2] Lamp Cap
[3] Lamp
[4] LED
[5] Switch
[6] Handle
[7] Stand
[8] Battery
[9] Latch
Advertisement
Table of Contents
