Spectacle Kit - MSA G1 SCBA Operating Manual

17

Spectacle Kit

WARNING!
Before using a spectacle kit, an optometrist must inspect the spectacle kit and prescribe the correct
lenses to fit into the lens frame on the spectacle kit. Failure to follow this warning could result in serious
personal injury or death.
(1) Flip the head harness over the front of the facepiece so the
harness is covering the lens of the facepiece.
This will open up the faceblank to make it easier to install
the spectacle kit.
(2) Squeeze in on the wire frame of the spectacle kit at the
large bends about 2" from the ends.
(3) Push the top part of the frame into the lens. The faceblank
has three rubber tabs to grab the frame.
a)Place the frame in the middle of the lens with the smaller
tabs grabbing the wire frame.
G1 SCBA
Spectacle Kit
US
80