Advertisement
PORTOS Sp.J.
ul. Złota 71
62 - 800 Kalisz
tel. +48 62 768 40 00
sekretariat@portosrolety.pl
www.portosrolety.pl
Technical data:
Nominal voltage:
Nominal current:
Ambient temperature:
Dimensions:
Controller functions:
The device allows to control one
tubular motor. It has a built-in
receiver compatible with all 433
MHz PORTOS radio transmitters
and a possibility to attach a
pushbutton*. The controller can be
installed in a gang box.
* only pushbutton without support
and the possibility to press
simultaneously both buttons
R
Flush mounted
radio receiver
230V, 50Hz
5A
-25 to +85
44 mm x 44 mm x 25 mm
INSTRUCTION
MANUAL
XT-R
Setting switch
Advertisement
Table of Contents
Related Manuals for Portos XT-R
Summary of Contents for Portos XT-R
-
Page 1: Technical Data
Controller functions: The device allows to control one tubular motor. It has a built-in receiver compatible with all 433 MHz PORTOS radio transmitters and a possibility to attach a pushbutton*. The controller can be installed in a gang box. * only pushbutton without support... - Page 2 Programming of the controller There are two possible ways of setting the receiver: Setting via a remote – if there is a possibility to switch off and on the power supply for each motor separately Setting via the setting switch – when there is no possibility to disconnect each motor separately from the power supply Programming a remote (1 method) 1.
-
Page 3: Resetting The Receiver
Resetting the receiver: Resetting the (1 method): 1. The remote does not need to be programmed. 2. Switch OFF the power supply for 3 seconds. 3. Switch ON the power supply for 3 seconds. 4. Switch OFF the power supply for 3 seconds. 5. - Page 4 IP 44. When mounting outside place the controller in a proper casing in order to protect it from water, humidity, etc. • Switch off the power supply when connecting the device • XT-R devices must not be installed in their direct vicinity of each other - the minimum distance must be 20 cm.
Need help?
Do you have a question about the XT-R and is the answer not in the manual?
Questions and answers