Event Log Codes - Honeywell Lyric User Reference Manual
Hide thumbs
Also See for Lyric:
- Programming manual (48 pages) ,
- User quick manual (32 pages) ,
- Quick user manual (17 pages)
Table of Contents
Advertisement
The Lyric™ Controller's Event Log can record and display as many as 6000 system events. Events
are stored locally in the Controller, in chronological order and sent to your monitoring company as
needed. When the maximum number of stored events is reached, the oldest 2000 entries are
deleted to make room for logging new events.
The type of events that can be recorded is selectable; refer to the Lyric Controller Installation and
Reference Guide's Programming section. The Events and codes displayed vary with your system's
options. The table below provides definitions of the events/codes that may be transmitted to the
Central Station and/or displayed by the controller.
Note: If the Controller's backup battery is exhausted after AC power is lost, any system activity
occurring after the Low Battery notification is not saved. Additionally, the Controller appears to have
the same status condition as it did before the low battery notification.
Code
110
Alarm, Fire
121
Alarm, Duress
122
Alarm, Silent
123
Alarm, Audible
131
Alarm, Perimeter
132
Alarm, Interior
134
Alarm, Entry/Exit
135
Alarm, Day/Night
137
Alarm, Tamper
145
Expansion Module Tamper
146
Silent Burglary
150
24-Hour Non-Burglary
162
Carbon Monoxide Detected
301
Trouble, AC Loss
302
Trouble, Low System Battery
305
Trouble, System Reset
308
System shutdown
316
System Tamper*
341
Trouble, Case Tamper
344
Trouble, RF Receiver Jam Detect
350
Long Range Radio Reset
353
Trouble, Long Range Radio Transmitter Fault
354
Failure to Communicate Event
373
Trouble, Fire Trouble
374
Trouble, Exit Error Alarm
380
Trouble, Sensor
381
Trouble, Loss of Supervision RF
383
Trouble, Sensor Tamper
Event Log Codes
Event Log Codes
Definition
61
Event Log Display
Fire
Duress
Silent
Audible
Perimeter
Interior
Entry/Exit
Day Night
Tamper
Expansion Module Tamper
Silent Burglary
24 Hour Non-Burglary
Carbon Monoxide Detected
AC Loss
Low system battery
System Reset
System shutdown
System Tamper
Cover Tamper
RF Jam Detect
Long Range Radio Reset
Comm. Trouble
Failure to Communicate Event
Fire trouble
Exit error alarm
Sensor trouble
Superv Loss-RF
Sensor Tamper
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Lyric and is the answer not in the manual?
Questions and answers
Bought this house and previous owner did not give me the 4 digit code. Can it be reset
No, the Honeywell Lyric cannot be reset if the 4-digit installer code is not available. If the installer code is changed and forgotten, there is no way to re-access programming or backdoor the system without it.
This answer is automatically generated
How do you clear the panic button or does it stay red all the time?
The panic button on the Honeywell Lyric stays red all the time. It is always lit red, not as an indication of an issue, but so it can be seen and pressed easily, even at night.
This answer is automatically generated