Summary of Contents for American Flyer E-Wave
- Page 1 E-Wave Electric Bicycle Ownerʼs Reference Guide American Flyer Bikes admin@americanflyerbikes.com 640 N Tustin Ave #100, Santa Ana, CA 92705 www.AmericanFlyerBicycle.com Tel: (949) 791-8099...
-
Page 2: Important Warranty Information
Especially the handlebar, front wheel and pedals. The pedals, in particular, must be very tightly fastened. Your bicycle's warranty is voided if not assembled by an authorized American Flyer Service Center. If you have any doubts contact us via our support number (949) 791-8099, or send us an email at TechSupport@AmericanFlyerBikes.com... - Page 3 We recommend you to ride your bike with the power off at first, to become familiar with your E-Wave's braking and gear shifting. Then, you can start testing the assist levels incrementally to gain familiarity...
-
Page 4: Charging The Battery
The American Flyer E-Wave features a high-capacity Lithium Ion rechargeable battery. Charge the battery fully before your first use. The charger that came with your E-Wave recognizes the battery pack’s initial charge and will automatically cease charging when the battery is fully charged; don’t be shy about topping off your battery any time at all. - Page 5 • Charging takes between 1 and 6 hours, depending on battery size and initial charge level (see verifying battery charge level on page 10). • When the pack is fully charged, the charger’s light will change from amber to green and automatically stop charging. •...
- Page 6 • Press the power button. • The lights on the controller's display panel will illuminate, giving an indication of the battery’s charge level and selected assist level. For the Sport Controller (Class 3) The E-Wave will Pedal Assist up to 28 mph. •...
- Page 7 For the Sport Controller with the Throttle kit installed (Stock version) The E-Wave can now ride on battery power alone. Throttle up to • 20 mph. Also the pedal Assist will be active at the same time up to 28 mph.
-
Page 8: Using The Brakes
Using the Brakes The bike comes equipped with front and rear Shimano disc brakes; one of the most reliable bike brands. The brake's main function is to slow down or to stop the bicycle. • The brake on the front wheel is controlled by the lever on the left- hand side of the handlebar. - Page 9 Shifting the gears Your E-Wave comes equipped with a Shimano 8 speed gear set. The lower gears are useful for starting off from a stop or when riding slowly or climbing steep hills. Higher gears are most effective when riding at speed. The mid gears fit into the space between.
- Page 10 Using the Assist Control The control system can be used to maintain a constant level of pedal assist. How to use the Assist control feature: • Turn your bike on. • Using the + or - Buttons, you can select the Assist levels between ECO ( Battery efficiency ), 1, 2 and 3.
- Page 11 How to read the battery level There are 5 LED lights on top of the Controller's display which will give you an indication of the batteryʼs voltage ( Additionally, there are 4 LED on top of the battery pack that are useful when charging the battery outside the bike ).
- Page 12 Understanding Battery Range All electric bicycles have a riding range that can vary greatly depending on how it is ridden, terrain, tire pressure, temperature, payload and wind. After a few rides, you will get a sense of the electric bicycle’s range capability. Factors that will decrease your range: •...
- Page 13 Battery Information and Safety About the Lithium ion battery Your Lithium battery does not have a “memory effect” associated with older battery technologies. It is highly recommended you charge the battery after every ride even if the battery is only lightly used.
-
Page 14: Removing The Battery
Removing the battery The battery can be removed from the bike. This is useful for storing the bike or when the bike is being transported. • Turn off the bicycle. • Stand on the non-drive side of the bicycle. • Locate the Keyhole on top of the battery. - Page 15 Key parts of the electric bicycle An electric bicycle is a lot like a normal bicycle. The major difference is the inclusion of a motor which provides a boost when desired. An onboard rechargeable lithium ion battery supplies the motor with electric power.
-
Page 16: Gear Shifter
Key parts of the electric bicycle (continued) Gear Shifter The gear shifter changes the ratio between the pedals and the rear wheel. It is used to find a more comfortable pedaling cadence under different riding conditions. The low gear is used for pedaling during starts, uphill or loaded riding. - Page 17 Adjusting the bicycle for riding comfort 1. Adjusting the seat height Pull the seat clamp lever outward to loosen the seat post. Adjust the seat the desired height. The maximum height should not extend beyond minimum extension mark marked on the seat post. Tighten the seat clamp and close the lever to lock in the seat’s height.
-
Page 18: Important Safety Information
Important Safety Information Basic Bicycle Safety • Always wear a helmet. • Follow all traffic and safety rules • Use a light and wear reflective clothing when riding at night. • Reduce speed when riding on a wet surface. • Properly inflate tires. - Page 19 Electric Bicycle Safety • For maximum stability, avoid accelerating or braking while turning. • Avoid riding in extremely wet conditions. • Do not leave the electric bicycle in the rain. • Discontinue the use of the electric bicycle if the battery pack is damaged due to crash or a drop.
- Page 21 Be sure to understand and follow all local laws & regulations and to have maintenance/repairs done by an authorized American Flyer dealer. Don’t use/ride any American Flyer bikes product in ways unintended by the manufacturer and don’t exceed the weight limit of any product.
-
Page 22: Warranty Exclusions
American Flyer Bikes Warranty At American Flyer Bikes, we take great pride in the quality and durability of our products. We’re confident that you will be impressed as well, and we stand behind all of our products. Every bike/e-bike we sell is covered by a limited 1-year warranty against manufacturing defects subject to... - Page 23 Scope of Warranty Service In case of a warranty claim within the warranty period for a non-excluded situation AFB agrees to: Repair or replace the failed warrantied PRODUCTS with equivalent parts/accessories/components at the discretion of AFB, by AFB, an authorized AFB dealer, or by a third-party with the approval of AFB. Replacement parts may not be identical to those being replaced.
Need help?
Do you have a question about the E-Wave and is the answer not in the manual?
Questions and answers
what is a code 4