Cleaning The Air Filter - Argo PLATINUM 21 Operating Instructions Manual

V 10/16

CLEANING THE AIR FILTER

The filter is designed to remove dust or dirt from the air.
If the filter is clogged by dust, electricity consumption will be higher than
normal.
To optimise humidity removal efficiency, clean the filter when the
FILTER CLEAN LED turns on.
Cleaning instructions:
1. Press the side levers and slightly separate the front panel from the
bottom, then the top.
2. Remove the filter by pulling the top towards you.
Clean the filter with a vacuum cleaner or wash it with clean water
at no more than 40 °C.
DO NOT USE ALCOHOL, BENZENE OR OTHER AGGRESSIVE
PRODUCTS TO CLEAN THE FILTER.
Leave the filter to dry naturally, then reposition it in the relevant
slot.
3. Reinsert the filter by fitting the lower hooks into the unit (in the
correct "UP" position) and pushing down the filter until you hear a
sound.
Do not use the dehumidifier without the filter as dust may affect the
efficiency of the evaporator, resulting in higher energy consumption.
20