Data Delete; Data Format; System Info - ChallengerOptics CO-OPM-48 Operating Manual

Chapter 2.3 - Menu

2.3.6 Data Delete

Press the button after
ENTER
–
selecting 'Delete Data' , you can
delete saved measurements .
Use ▲ and ▼ to select data set
to be deleted .
Press the ENTER key after
–
choosing the data you want to
delete, the message appears on
the screen to confirm to delete
or not .
Press the button, to
ENTER
–
delete measurement from the
memory .
ChallengerOptics.com
Wavelength Specific Optical Testing and Measurement Equipment
/ 17 Chapter 2.3 - Menu

2.3.7 Data Format

You can delete all saved files by
formatting the memory .
Press the key after 'Data
ENTER
–
Format' , message appears on
the screen to confirm .
Press the ENTER button, all files
–
are deleted from the memory .
CAUTION: This option deletes ALL DATA saved on the meter .

2.3.8 System Info

General information about the
equipment .
PN (Part Number)
SN (Serial Number)
HW (Hardware version)
FW (Firmware version)
ChallengerOptics.com
Wavelength Specific Optical Testing and Measurement Equipment
/ 18