Allworx PowerFlex P810 User Manual
  1. Manuals
  2. Brands
  3. Allworx Manuals
  4. Switch
  5. PowerFlex P810
  6. User manual
Allworx PowerFlex P810 User Manual

Allworx PowerFlex P810 User Manual

8/24/48 port gbe poe managed switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

PowerFlex 8/24/48 Port GbE PoE Managed
Switch
User's Guide
Updated October 30, 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerFlex P810 and is the answer not in the manual?

Questions and answers

Related Manuals for Allworx PowerFlex P810

Summary of Contents for Allworx PowerFlex P810

  • Page 1 PowerFlex 8/24/48 Port GbE PoE Managed Switch User’s Guide Updated October 30, 2013...
  • Page 3 PowerFlex 8/24/48 Port GbE PoE Managed Switch User’s Guide...
  • Page 4 Allworx Corp. All brand and product names referenced in this guide are trademarks or registered trademarks of their respective companies.
  • Page 5 To avoid electric shock, turn the power off and detach the input power cord prior to doing any equipment maintenance. After completing the equipment maintenance, verify the ground connection and setup. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page iii...
  • Page 6 8/24/48 Port GbE PoE Managed Switch User’s Guide Revision History This section summarizes the changes in each revision of this guide. Release Date Revision V2.29 09/09/2013 V1.52 05/22/2013 V1.07 10/17/2011 Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page iv...

  • Page 7: Table Of Contents

    4.19 Easy Port ....................153 4.20 Mirroring ....................155 4.21 Trap Event Severity ................157 4.22 SMTP Configuration ................158 4.23 UPnP ..................... 159 Security ..................... 160 Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page v...
  • Page 8 Maintenance ..................... 203 Restart Device ..................203 Firmware ....................204 Save / Restore ..................206 Export / Import ..................208 Diagnostics .................... 210 Glossary of Web-based Management ............ 213 Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page vi...

  • Page 9: Introduction

    Support Easy-Configuration-Port for easy implementation of IP Phones, IP Cameras or Wireless environment. Overview of this User’s Guide • Chapter 2 “Operation of Web-based Management” • Chapter 3 “Maintenance” Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 1...

  • Page 10: Operation Of Web-Based Management

    The PowerFlex Series switches ship with a preconfigured firmware image. This eliminates the need to make changes to the switch in order for it to work with the Allworx servers and phones. The default configuration is detailed below. Following the instructions below makes the server, switch, and phones a plug-n-play network.
  • Page 11 V7.1 or above or FireFox V1.00 or above and have the resolution set to 1024x768. To configure a function or parameter, access the online Help in the web GUI. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013...

  • Page 12: System Configuration

    User-defined location of the switch. Contact User-defined contact person for switch administration. Configure this parameter through the device user interface or SNMP. Device name User-defined name for the switch. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 4...
  • Page 13 Bridge FDB size Displays the bridge RDB size. Transmit Queue Displays the device’s transmit hardware priority queue information. Maximum Frame size Display the device maximum frame size. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 5...
  • Page 14 The physical location of this switch (e.g., telephone closet, 3rd floor). The string length is 0 to 255, and the content is ASCII characters from 32 to 126. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 6...

  • Page 15: Time

    Users do not need to set the starting/ending date as well. If setting daylight saving to be non-zero, set the starting/ending date as well; otherwise, the daylight saving function is not active. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 7...
  • Page 16 Select “ By Dates” or “Recurring”. From Configure Daylight saving start date and time. The format is “YYYY-MM-DD HH:MM”. Configure Daylight saving end date and time. The format is “YYYY-MM-DD HH:MM” Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 8...
  • Page 17 16-bit groups of contiguous zeros; but it can only appear once.It can also represent a legally valid IPv4 address.For example, '::192.1.2.34 Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 9...

  • Page 18: Account

    15. In general, the privilege level 15 can be used for an administrator account, privilege level 10 for a standard user account and privilege level 5 for a guest account. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 10...

  • Page 19: Privilege Level

    To configure Privilege Level in the web interface: 1. Navigate to System > Account > Privilege Level. 2. Specify the Privilege parameter. 3. Click Apply. Figure 7: Privilege Level Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 11...
  • Page 20 (e.g. for clearing of statistics). User Privilege should be same or greater than the authorization Privilege level to have access to that group. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 12...
  • Page 21 To configure an IP address in the web interface: 1. Navigate to System > IPV4. 2. Specify the IPv4 settings, and enable DNS proxy service if required. 3. Click Apply. Figure 8: IP Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 13...
  • Page 22 When DNS proxy is enabled, the switch will relay DNS requests to the current configured DNS server, and reply as a DNS resolver to the client device on the network. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 14...
  • Page 23 16- bit groups of contiguous zeros; but it can only appear once. It can also represent a legally valid IPv4 address. . For example, '::192.1.2.34' Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 15...

  • Page 24: Syslog

    Syslog Level Indicates what kind of messages will be sent to the syslog server. Possible levels are: Debug, Info, Notice, Warning, Error, Critical, Alert, Emergency. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 16...
  • Page 25 Display a detailed log detail message. Upper right icons Click to refresh or clear the system log and to go to next and previous page (Refresh, clear, etc.) entries. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 17...

  • Page 26: Detailed Log

    Display a detailed log detail message. Upper right icons (Refresh, Click to refresh or clear the system log and to go to next and previous page clear, etc.) entries. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 18...

  • Page 27: Snmp

    Enable: Enable SNMP state operation. Disable: Disable SNMP state operation. Engine ID SNMPv3 engine ID. Syntax: 0-9,a-f,A-F, min 5 octet, max 32 octet, fifth octet cannot be 00. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 19...
  • Page 28 1 to 32, and the content is ASCII characters from 33 to 126. The community string will be treated as security name and map an SNMPv1 or SNMPv2c community string. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 20...
  • Page 29 The SNMP access source address. A particular range of source addresses can be used to restrict source subnet when combined with source mask. Source Mask Indicates the SNMP access source address mask. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 21...
  • Page 30 None: No authentication protocol. MD5: An optional flag to indicate that this user uses MD5 authentication protocol. SHA: An optional flag to indicate that this user uses SHA authentication protocol. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 22...
  • Page 31 Privacy Password A string identifying the privacy password phrase. The string length is 8 to 32, and the content is ASCII characters from 33 to 126. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 23...

  • Page 32: Groups

    Group Name A string identifying the group name for this entry. The string length is 1 to 32, and the content is ASCII characters from 33 to 126. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 24...

  • Page 33: Views

    The OID defining the root of the subtree to add to the named view. The OID length is 1 to 128. The string content is digital number or asterisk(*). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013...

  • Page 34: Access

    The name of the MIB view defining the MIB objects for which this request may potentially set new values. The string length is 1 to 32, and the content is ASCII characters from 33 to 126. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 26...

  • Page 35: Trap

    Check to delete the entry - deleted during the next save. Trap Version Select v2c or v3 trap. Server IP Server IP address to send the trap. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 27...
  • Page 36 The length of 'SHA Authentication Password' is restricted to 8 – 40. Privacy Protocol The privacy protocol is set to DES encryption. Privacy Password The length of ' Privacy Password ' is restricted to 8 – 32. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 28...

  • Page 37: Configuration

    1. Navigate to Configuration > Port > Configuration. 2. Specify the Speed Configured, Flow Control, Maximum Frame size, Excessive Collision mode, and Power Control. 3. Click Apply. Figure 21: Port Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 29...
  • Page 38 Disabled: All power savings mechanisms disabled. ActiPHY: Link down power savings enabled. PerfectReach: Link up power savings enabled. Enabled: Both link up and link down power savings enabled Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 30...

  • Page 39: Port Description

    3. Click Apply. Figure 22: Port Description Parameter Description Port This is the port number. Description Description of device ports CANNOT contain “ # % & ‘ + \. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 31...

  • Page 40: Traffic Overview

    The number of frames received in error and the number of incomplete transmissions per port. Drops The number of frames discarded due to ingress or egress congestion. Filtered The number of received frames filtered by the forwarding process. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 32...

  • Page 41: Detailed Statistics

    Rx and Tx Multicast The n.umber of received and transmitted (good and bad) multicast packets. Rx and Tx Broadcast The number of received and transmitted (good and bad) broadcast packets. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 33...
  • Page 42 The number of frames dropped due to excessive or late collisions. 1Short frames are frames that are smaller than 64 bytes. 2Long frames are frames that are longer than the configured maximum frame length for this port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 34...

  • Page 43: Qos Statistics

    Qn is the Queue number. Q0 is the lowest priority queue. Rx/Tx The number of received and transmitted packets per queue. Auto-refresh To refresh the Queuing Counters automatically. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 35...

  • Page 44: Sfp Information

    Display the Bias current of SFP module. Mon2 (TX PWR) Display the transmit power of SFP module. Mon3 (RX PWR) Display the receiver power of SFP module. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 36...
  • Page 45 Queues set will activate transmition of frames as soon as any data is available. Otherwise the queue will postpone the transmsion until 3000 bytes are ready to be transmitted. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 37...

  • Page 46: Acl

    3. Click Apply or click Reset to revert to previously saved values. 4. Click Refresh to refresh port counters or Clear to clear port counters. Figure 28: ACL Ports Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 38...
  • Page 47 Disabled: To close ports by changing the volatile port configuration of the ACL user module. The default value is "Enabled". Counter Counts the number of frames that match this ACE. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 39...

  • Page 48: Rate Limiters

    The values are: 0-3276700 in pps or 0, 100, 200, 300, ..., 1000000 in kbps. Unit Specify the rate unit. The values are: pps: packets per second. kbps: Kbits per second. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 40...

  • Page 49: Access Control List

    Frame Type and IP Protocol type. Specify the relevant criteria to match for this rule and set the actions to take when matching a rule (such as Rate Limiter, Port Copy, Logging, and Shutdown). Figure 30: ACL Rate Limiter Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 41...
  • Page 50 Enabled: Frames matching the ACE are stored in the System Log. Disabled: Frames matching the ACE are not logged. Please note that the System Log memory size and logging rate are limited. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 42...
  • Page 51 : Moves the ACE down the list. : Deletes the ACE. : The lowest plus sign adds a new entry at the bottom of the ACE listings Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 43...

  • Page 52: Acl Status

    Permit: Frames matching the ACE may be forwarded and learned. Deny: Frames matching the ACE are dropped. Rate Limiter Indicates the rate limiter number of the ACE. The range is 1 to 16. When disabled, Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 44...
  • Page 53 The counter indicates the number of times the ACE was hit by a frame. Conflict Indicates the hardware status of the specific ACE. If Yes, the specific ACE is not applied to the hardware due to hardware limitations. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 45...

  • Page 54: Aggregation

    “logical trunked port”. Allworx strongly recommends using Static Trunk on both ends of a link. Please also note that low speed links will stay in “not ready” state when using static trunk to aggregate with high speed links.
  • Page 55 By default, no ports belong to any aggregation group. Only full duplex ports can join an aggregation and ports must have the same speed in each group. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 47...

  • Page 56: Lacp

    4. Set the role to Active or Passive. Default is Active. 5. Click Apply or click Reset to revert to previously saved values. Figure 33: LACP Port Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 48...

  • Page 57: System Status

    Last Changed The time since this aggregation changed. Local Ports Displays which ports are a part of this aggregation for this switch/stack. The format is: "Switch ID:Port". Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 49...
  • Page 58 LACP Transmitted Indicates the number of sent LACP frames from each port. Discarded Displays how many unknown or illegal LACP frames have been discarded at each port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 50...

  • Page 59: Spanning Tree

    2. Use the drop-down menus to select the parameters and specify other values in the Basic Settings. 3. Specify parameters in the Advanced settings. 4. Click Apply or click Reset if to want to revert to previously saved values. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 51...
  • Page 60 BPDU will be delayed. Valid values are in the range 1 to 10 BPDUs per second. Advanced Settings Edge Port BPDU Filtering Control whether a port explicitly configured as Edge will transmit and receive BPDUs. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 52...
  • Page 61 Port Error Recovery Timeout The time to pass before a port in the error-disabled state can be enabled. Valid values are between 30 and 86400 seconds (24 hours). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 53...

  • Page 62: Msti Mapping

    The list of VLANs mapped to the MSTI. The VLANs must be separated with comma and/or space. A VLAN can only be mapped to one MSTI. An unused MSTI should just be left empty. (i.e. not have any VLANs). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 54...

  • Page 63: Msti Priorities

    Controls the bridge priority. Lower numeric values have higher priority. The bridge priority plus the MSTI instance number, concatenated with the 6-byte MAC address of the switch forms a Bridge Identifier. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 55...

  • Page 64: Cist Ports

    Lower path cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid values are in the range 1 to 200000000. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 56...
  • Page 65 Controls whether the port connects to a point-to-point LAN rather than to a shared medium. This can be automatically determined, or forced either true or false. Transition to the forwarding state is faster for point-to-point LANs than for shared media. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 57...

  • Page 66: Msti Ports

    4. Use the drop-down menus to set all parameters of the MSTI Port configuration. 5. Click Apply or click Reset to cancel the changes and revert to previously saved values. Figure 40: MSTI Port Configuration Parameter Description Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 58...

  • Page 67: Bridge Status

    The current state of the Topology Change Flag of this Bridge instance. Toppology Change Last The time since last topology change occurred. 4.5.7 Port Status This section displays the CIST port status. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 59...
  • Page 68 4.5.8 Port Statistics After completing the STP configuration, display the STP Statistics. This section displays the STP Statistics counters of the bridge ports in the currently selected switch. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 60...
  • Page 69 The number of unknown Spanning Tree BPDUs received (and discarded) on the port. Discarded Illegal The number of illegal Spanning Tree BPDUs received (and discarded) on the port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 61...

  • Page 70: Igmp Snooping

    4. Use the drop-down menu to set the Throttling parameter. 5. Click Apply or click Reset to cancel the changes and revert to previously saved values. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 62...
  • Page 71 Fast Leave Enable fast leave on the port. Throttling Enable to limit the number of multicast groups to which a switch port can belong. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 63...
  • Page 72 4. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 45: IGMP Snooping VLAN Configuration Parameter Description Snooping Enabled Enable the Global IGMP Snooping. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 64...
  • Page 73 Check to delete the entry. It will be deleted during the next Apply. Port Select port for which to enable the IGMP Snooping Port Group Filtering function. Filtering Groups The IP Multicast Group(s) that will be filtered. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 65...
  • Page 74 The number of Received V2 Reports. V2 Reports Received The number of Received V3 Reports. V3 Reports Received The number of Received V2 Leaves. V2 Leaves Received Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 66...
  • Page 75 "No more entries" displays. IGMP Group Table Columns VLAN ID VLAN ID of the group. Groups Group address of the group displayed. Port Members Ports under this group. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 67...

  • Page 76: Ipv4 Ssm Information

    The switch will use the last entry of the currently displayed table as a basis for the next lookup. When reaching the end the text "No more entries" displays. IGMPv3 Information Table Columns VLAN ID VLAN ID of the group. Groups Group address of the group displayed. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 68...
  • Page 77 IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to 128. Type Indicates the Type. It can be either Allow or Deny. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 69...

  • Page 78: Mld Snooping

    3. Check the boxes to set the port to join Router port and Fast Leave. 4. Set the Throttling mode to unlimited or 1 to 10. 5. Click Apply or click Reset to cancel changes and revert to previously saved values. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 70...
  • Page 79 Fast Leave To enable the fast leave on the port. Throttling Enable to limit the number of multicast groups to which a switch port can belong. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 71...
  • Page 80 Figure 51: MLD Snooping VLAN Configuration Parameter Description VLAN ID The VLAN ID of the entry. Snooping Enabled Enable the per-VLAN MLD Snooping. Select up to 64 VLANs. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 72...
  • Page 81 Check to delete the entry. It will be deleted during the next apply. Port The logical port for the settings. Filtering Groups The IP Multicast Group that will be filtered. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 73...
  • Page 82 V1 Reports Received The number of Received V1 Reports. V2 Reports Received The number of Received V2 Reports. V1 Leaves Received The number of Received V1 Leaves. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 74...

  • Page 83: Group Information

    "No more entries" displays. MLD Snooping Information Table Columns VLAN ID VLAN ID of the group. Groups Group address of the group displayed. Port Members Ports under this group. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 75...

  • Page 84: Ipv6 Ssm Information

    IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128. Type Indicates the Type. It can be either Allow or Deny. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 76...

  • Page 85: Mvr

    Specify the MVR port type on the port. Immediate Leave IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 77...
  • Page 86 MVR Port Group Allow Parameter Description Delete Check to delete entry – the next apply deletes. Port Indicates the port number. Allow Group The allowed IP multicast groups. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 78...
  • Page 87 MVR Groups Information Parameter Description MVR Group Table Columns VLAN ID VLAN ID of the group. Groups Group ID of the group displayed. Port Members Ports under this group. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 79...
  • Page 88 V2 Reports Received The number of Received V2 Reports. V3 Reports Received The number of Received V3 Reports. V2 Leaves Received The number of Received V2 Leaves. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 80...

  • Page 89: Lldp

    3. Set the required mode for transmitting or receiving LLDP messages. 4. Specify the information to include in the TLV field of advertised messages. 5. Click Apply. Figure 60: LLDP Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 81...
  • Page 90 CDP TLV "Device ID" is mapped to the LLDP "Chassis ID" field. CDP TLV "Address" is mapped to the LLDP "Management Address" field. The CDP address TLV can contain multiple addresses, but Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 82...
  • Page 91 Optional TLV: When checked the "system capability" is included in LLDP information transmitted. Mgmt Addr Optional TLV: When checked the "management address" is included in LLDP information transmitted Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 83...

  • Page 92: Lldp Neighbors

    Management Address is the neighbor unit's address that is used for higher layer entities to assist discovery by the network management. This could for instance hold the neighbor's IP address. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 84...
  • Page 93 2. Modify the parameters according to requirement. 3. Click Add new policy. After defining the new policy, apply it to the ports. 4. Click Apply. Figure 62: LLDP-MED Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 85...
  • Page 94 Map Datum The Map Datum is used for the coordinates given in these options: WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 86...
  • Page 95 Zip code Postal/zip code - Example: 27913. Building Building (structure) - Example: Low Library. Apartment Unit (Apartment, suite) - Example: Apt 42. Floor Floor - Example: 4. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 87...
  • Page 96 Devices and Endpoints, and therefore does not need to advertise the multitude of network policies that frequently run on an aggregated link interior to the LAN Delete Check to delete the policy. It will be deleted during the next apply. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 88...
  • Page 97 The tagged frame format also includes priority tagged frames as defined by IEEE 802.1Q-2003. VLAN ID VLAN identifier (VID) for the port as defined in IEEE 802.1Q-2003. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 89...
  • Page 98 The set of policies that shall apply to a given port. The set of policies is selected by check marking the checkboxes that corresponds to the policies. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 90...
  • Page 99 Each LLDP-MED Endpoint Device Class is defined to build upon the capabilities defined for the previous Endpoint Device Class. For-example will any LLDP-MED Endpoint Device claiming compliance as a Media Endpoint (Class II) also support Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 91...
  • Page 100 Endpoint or Network Connectivity Device. The possible application types are shown below. 1. Voice - for use by dedicated IP Telephony handsets and other similar appliances Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 92...
  • Page 101 DSCP is the DSCP value to be used to provide Diffserv node behavior for the specified application type as defined in IETF RFC 2474. It contains one of 64 code point values (0 through 63). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 93...
  • Page 102 Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 94...
  • Page 103 EEE information exchanged via LLDP). Auto-refresh To evoke the auto-refresh icon then the device will refresh the information automatically. Upper right icon Click refresh the LLDP Neighbours information manually. (Refresh) Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 95...
  • Page 104 Displays the number of LLDP frames dropped due to the entry table being full. Total Neightbor Entries Aged Displays the number of entries deleted due to Time-To-Live expiring. Local Counters The displayed table contains a row for each port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 96...
  • Page 105 Each LLDP frame contains information about how long the LLDP information is valid (age-out time). If no new LLDP frame is received within the age out time, the LLDP information is removed and the Age-Out counter is incremented. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 97...

  • Page 106: Poe

    The Priority represents the port’s priority. There are three levels of power priority - Low, High and Critical. The priority is used in the case where the remote devices require more power Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 98...
  • Page 107 The Power Used displays the power the PD is currently using. Current Used The Current Used displays the current the PD is currently using. Priority The Priority displays the port's priority configured by the user (Allworx is typically 3 watts). Port Status The Port Status displays the port's status.

  • Page 108: Power Delay

    Disabled: Disable PoE power delay Delay Time Upon reboot, the PoE port with start providing power after waiting for the delay time to end. Value ranges from 0 – 300 sec. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 100...

  • Page 109: Auto Checking

    Failure counter. Failure Action Nothing: Port continues to ping PD but no action is taken. Reboot Remote PD: Turn off PoE port power causing PD to reboot. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 101...
  • Page 110 Indicates the switch port number. Status PoE Scheduling status Enabled: Enable PoE scheduling Disabled: Disable PoE scheduling Hour Time of the day to provide PoE on the selected port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 102...

  • Page 111: Filtering Database

    2. Specify the VLAN ID, MAC address and select the port members. 3. Click Apply or click Reset to cancel changes and revert to previously saved values. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 103...
  • Page 112 Learning is done automatically as soon as a frame with unknown SMAC is received. Disable No learning is done. Secure Only static MAC entries are learned, all other frames are dropped. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 104...
  • Page 113 Adding a New Static Entry Click to add a new entry to the static MAC table. Specify the VLAN ID, MAC address, and port members for the new entry. Click Apply. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 105...

  • Page 114: Dynamic Mac Table

    Indicates whether the entry is a static or dynamic entry. VLAN ID The VLAN ID of the entry. MAC Address The MAC address of the entry. Port Members The ports that are members of the entry. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 106...

  • Page 115: Vlan

    VLAN is thereafter present on the other stack switch units, but with no port members. The check box is greyed out when VLAN is displayed on other stacked switches, but user can add member ports to it. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 107...
  • Page 116 0x8100 Ethertype field value on 802.1Q-tagged or 802.1p- tagged frames. Port Indicates the port number. Port Type Port can be one of the following types: Unaware, Customer port(C-port), Service Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 108...
  • Page 117 Configures the VLAN identifier for the port. The values are 1 through 4095. The default value is 1. NOTE: The port must be a member of the same VLAN as the Port VLAN ID. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 109...
  • Page 118 VLAN Users, and this is by default. VLAN membership allows the frames classified to the VLAN ID to be forwarded on the respective VLAN member. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 110...
  • Page 119 VLAN port configuration, the following conflicts can occur: • Functional Conflicts between features. • Conflicts due to hardware limitation. • Direct conflict between user modules. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 111...

  • Page 120: Private Vlans

    Adding a New Private Click to add a new private VLAN ID. An empty row is added to the table, and the VLAN private VLAN can be configured as needed. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 112...

  • Page 121: Port Isolation

    A check box is provided for each port of a private VLAN. When checked, port isolation is enabled on that port. When unchecked, port isolation is disabled on that port. By default, port isolation is disabled on all ports. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 113...
  • Page 122 2. Click Add new entry and specify the MAC address and VLAN ID. 3. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 79: MAC-based VLAN Membership Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 114...
  • Page 123 MAC-based VLAN Membership Status for User Static Parameter Description MAC Address Indicates the MAC address. VLAN ID Indicates the VLAN ID. Port Members Port members of the MAC-based VLAN entry. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 115...
  • Page 124 2. Click Add new entry and specify the frame type and group name. 3. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 81: Protocol to Group Mapping Table Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 116...
  • Page 125 Click to add a new entry in mapping table. An empty row is added to the table; configure the Frame Type, Value, and the Group Name as needed. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 117...

  • Page 126: Group To Vlan

    Click to add a new entry in mapping table. An empty row is added to the table. The Group Name, VLAN ID and port members can be configured as needed. Legal values for a VLAN ID are 1 through 4095. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 118...

  • Page 127: Voice Vlan

    Configuration The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, so that the switch can classify and schedule network traffic. Allworx recommends that there are two VLANs on a port - one for voice, one for data.
  • Page 128 Connect the phone to the switch. The phone fails to boot up. Press the button below the Config softkey and navigate to Network Settings. Select the option by pressing the  key. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 120...
  • Page 129 Once the phone boots up select CONFIG and navigate down to Set Factory Defaults. Select YES to save configuration changes. The phone will reboot and now will have the default VLAN mode set to Auto Config (desired setting). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 121...
  • Page 130 Click to add a new entry in Voice VLAN OUI table. An empty row is added to the table and the Telephony OUI and Description can be set. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 122...

  • Page 131: Garp

    2. Specify GARP parameters for all the ports. 3. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 85: GARP Port Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 123...
  • Page 132 GARP protocol exchanges. • Non-participant: In this mode the Applicant state machine will not participate in the protocol operation. The default configuration is normal participant Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 124...
  • Page 133 Normal-participant: In this mode the Applicant state machine will operate normally in GARP protocol exchanges. Non-participant: In this mode the Applicant state machine will not participate in the • protocol operation. The default configuration is normal participant Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 125...

  • Page 134: Gvrp

    To configure GVRP Port settings via the web interface: 1. Navigate to Configuration > GVRP > Configuration. 2. Specify the GVRP mode and port Parameters. 3. Click Apply. Figure 87: GVRP Global Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 126...
  • Page 135 This configuration is used to configure restricted role on an interface. • Disable: Select to Disable GVRP role on this port. • Enable: Select to Enable GVRP role on this port. The default configuration is ‘disable’ Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 127...
  • Page 136 The Port coulmn displays the list of ports to see port counters and statistics. Join Tx Count Number of GVRP Join packets sent by the switch Leave Tx Count Number of GVRP Leave packets sent by the switch Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 128...

  • Page 137: Qos

    2. Use the drop-down menu to set the various port parameters. 3. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 89: QoS Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 129...
  • Page 138 Enabled: Use mapped versions of PCP and DEI for tagged frames. Click on the mode in order to configure the mode and/or mapping. DSCP Based Click to Enable DSCP Based QoS Ingress Port Classification. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 130...

  • Page 139: Port Policing

    To set the Rate limit value for this port, the default is 500. Unit Scroll to select the unit of rate - includes kbps, Mbps, fps and kfps. The default is kbps. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 131...
  • Page 140 Figure 91: QoS Egress Port Schedules Click the Port index to set the QoS Egress Port Schedulers If selecting weighted mode, the parameters have to be set accordingly Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 132...
  • Page 141 "Unit" is "Mbps". Port Shaper Unit Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The default value is "kbps". Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 133...

  • Page 142: Port Shaping

    Figure 92: QoS Egress Port Shapers Click the Port index to set the QoS Egress Port Shapers If selecting weighted mode, the parameters have to be set accordingly Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 134...
  • Page 143 1000 when the "Unit" is "Mbps". Port Shaper Unit Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The default value is "kbps". Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 135...

  • Page 144: Port Tag Remarking

    Scroll to select the tag remarking mode for this port. Classified: Use classified PCP/DEI values. Default: Use default PCP/DEI values. Mapped: Use mapped versions of QoS class and DP level. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 136...

  • Page 145: Port Dscp

    Port Egress Rewriting can be one of below parameters • Disable: No Egress rewrite. • Enable: Rewrite enable without remapping. Remap: DSCP from analyzer is remapped and frame is remarked with remapped DSCP value. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 137...
  • Page 146 Maximum number of supported DSCP values is 64. Trust Click if the DSCP value is trusted. QoS Class QoS Class value can range from 0-7. Drop Precedence Level (0-3) Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 138...

  • Page 147: Dscp Translation

    Remap DP1: Select the DSCP value from select menu to remap. DSCP value ranges from 0 to 63. • Remap: Select the DSCP value from the menu to remap. DSCP values range from 0 to 63 Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 139...

  • Page 148: Dscp Classification

    Drop Precedence Level (0-1) can be configured for all available QoS Classes DSCP Select DSCP value (0-63) from DSCP menu to map to corresponding QoS Class and DPL value Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 140...

  • Page 149: Qos Control List Configuration

    Ethernet: Only allows Ethernet frames (with Ether Type 0x600-0xFFFF). • LLC: Only allows (LLC) frames. • SNAP: Only allows (SNAP) frames • IPv4: The QCE will match only IPV4 frames. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 141...
  • Page 150 Check the checkbox button to make any port a member of the QCL entry. By default all ports will be checked. Key Parameters Key configurations are described as below: Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 142...
  • Page 151 Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP • IPv6 :Protocol IP protocol number: (0-255, TCP or UDP) or 'Any' Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 143...
  • Page 152 Class QoS Class: "class (0-7)", default- basic classification DP Valid DP Level can be (0-3)", default- basic classification DSCP Valid dscp value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 144...

  • Page 153: Qcl Status

    If so, a ‘Yes’ conflic status displays, otherwise it is always 'No'.To resolve the conflict release the resource required by the QCE and press 'Refresh' button. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 145...

  • Page 154: Storm Control

    128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K. , 1024K, 2048K, 4096K, 8192K, 16384K or 32768K. , 1024K, 2048K, 4096K, 8192K, 16384K or 32768K. 1 kpps is actually 1002.1 pps Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 146...

  • Page 155: Sflow Agent

    It is the maximum UDP datagram size to send out the sFlow samples to the receiver. The range is 200 -1500 bytes. The default is 1400 bytes. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 147...
  • Page 156 Sampling Rate Configured sampling rate on the ports. Max Hdr Size Configured size of the header of the sampled frame. Polling Interval Configured polling interval for the sampling. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 148...

  • Page 157: Loop Protection

    The action performed when a loop is detected. Options are Shutdown Port, Shutdown Port and Log or Log Only Tx Mode Controls whether the port is actively generating loop protection PDUs or is just passively looking for PDUs. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 149...
  • Page 158 The current status of the port. Loop Whether a loop is currently detected on the port. Time of last loop The time the last loop was detected on the port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 150...

  • Page 159: Single Ip

    Master: Enable Single IP Management and set the switch as the Master switch Slave: Enable Single IP Management and set the switch as a Slave switch Group Name Name of the Single IP group upto 64 characters in length. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 151...
  • Page 160 The ID of the active Slave switch Model Name Displays the model name of the Slave switch MAC Address Displays the MAC address of the Slave switch Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 152...

  • Page 161: Easy Port

    Port Security limit the number of devices that can access the port (via MAC address). Port Security Action To set the action when a port security violation occurs. The options are Trap, Shutdown, Trap and Shutdown. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 153...
  • Page 162 Enable or disable the Spanning Tree Admin Edge function on the Easy Port. Edge Spanning Tree BPDU Enable or disable the Spanning Tree BPDU Guard function on the Easy Port. Guard Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 154...

  • Page 163: Mirroring

    Port Indicates the port number. Mode Select mirror mode. Rx only: Frames received on this port are mirrored on the mirror port. Frames transmitted are not mirrored. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 155...
  • Page 164 NOTE: For a given port, a frame is only transmitted once. It is therefore not possible to mirror Tx frames on the mirror port. Because of this, mode for the selected mirror port is limited to Disabled or Rx only. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 156...

  • Page 165: Trap Event Severity

    Group Name The field for which to generate Trap Events. Severity Level Select the event type. The options are “Emerg, Alert, Crit, Error, Warning, Notice, Info and Debug”, Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 157...

  • Page 166: Smtp Configuration

    To set the mail sender name. Return-Path To set the mail return-path as sender’s mail address. Email Address 1-6 Email addresses to send the alarm message to. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 158...

  • Page 167: Upnp

    1 to 255. Advertising Duration The duration tells the control point (s) how often it should receive an SSDP advertisement message from the switch. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 159...

  • Page 168: Security

    0, 1, 2 or unlimited. If the port mode is enabled and the value of max dynamic client is equal to 0, it means only forward IP packets that are matched in static entries on the specific port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 160...
  • Page 169 Click to add a new entry to the Static IP Source Guard table. Specify the Port, VLAN ID, IP address, and IP Mask for the new entry. Click Apply. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013...
  • Page 170 Switch Port Number for which the entries are displayed. VLAN ID VLAN-ID in which the IP traffic is permitted. IP Address User IP address of the entry MAC address Source MAC address. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 162...

  • Page 171: Arp Inspection

    Enable or disable ARP Inspection for each port. It has to be enabled both globally and at each port level for it to take effect on the port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 163...
  • Page 172 Allowed Source MAC address in ARP request packets. IP Address Allowed Source IP address in ARP request packets. Add new Entry Click to add a new entry to the Static ARP Inspection table. Buttons: Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 164...
  • Page 173 Switch Port Number for which the entries are displayed. VLAN ID VLAN-ID in which the ARP traffic is permitted. MAC Address User MAC address of the entry. IP Address User IP address of the entry. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 165...

  • Page 174: Dhcp Snooping

    Indicates the DHCP snooping port mode. Possible port modes are: Trusted: Configures the port as trusted source of the DHCP messages. Untrusted: Configures the port as untrusted source of the DHCP messages. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 166...
  • Page 175 Number of lease unknown (option 53 with value 12) packets received and Unknown transmitted. Rx and Tx Lease Active Number of lease active (option 53 with value 13) packets received and transmitted. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 167...

  • Page 176: Dhcp Relay

    DHCP message when transferring it to the DHCP client. It only works when DHCP relay operation mode is enabled. Disabled: Disable DHCP relay information mode operation Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 168...
  • Page 177 Keep:Keep the original relay information when a DHCP message that already contains it is received. Drop:Drop the packet when a DHCP message that already contains relay information is received. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 169...
  • Page 178 Number of packets replaced with relay agent information option. Keep Agent Option Number of packets when the relay agent information was retained. Drop Agent Option Number of dropped and received packets w/ relay agent information. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 170...

  • Page 179: Nas

    10. Specify Guest VLAN ID. 11. Specify Max. Reauth. Count. 12. Check Allow Guest VLAN if EAPOL Seen. 13. Click Apply. Figure 122: Network Access Server Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 171...
  • Page 180 MAC addresses: • • Single 802.1X • • Multi 802.1X • • MAC-Based Auth. If a client is denied access - either because the RADIUS server denies the Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 172...
  • Page 181 Guest VLAN is adjusted with this setting. The value can only be changed if the Guest VLAN option is globally enabled. Valid values are in the range [1- 255]. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 173...
  • Page 182 EAPOL Start frame from the supplicant and since the server has not yet failed (because the X seconds has not expired), the same server will be contacted Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 174...
  • Page 183 The 6-byte MAC address is converted to a string of the following form "xx-xx-xx-xx-xx-xx", that is, a dash (-) is used as separator between the lower- case hexadecimal digits. The switch only supports the MD5-Challenge Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 175...
  • Page 184 VLAN ID, and the port will be forced into VLAN unaware mode. Once assigned, all traffic arriving on the port will be classified and switched on the RADIUS-assigned VLAN ID. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 176...
  • Page 185 EAPOL Request Identity frames. If the number of transmissions of such frames exceeds Max. Reauth. Count and no EAPOL frames have been received in the meanwhile, the switch considers entering the Guest VLAN. The Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 177...
  • Page 186 Reinitialize: Forces a reinitialization of the clients on the port and thereby a reauthentication immediately. The clients will transfer to the unauthorized state while the reauthentication is in progress. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 178...
  • Page 187 If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is appended to the VLAN ID. If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 179...
  • Page 188 If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. Port Counters EAPOL Counters These supplicant frame counters are available for the following administrative states: • Force Authorized Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 180...
  • Page 189 Clicking the link causes the client's Backend Server counters to be shown in the Selected Counters table. If no clients are attached, it shows No clients attached. VLAN ID Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 181...
  • Page 190 Hold Time seconds. Last Authentication Shows the date and time of the last authentication of the client (successful as well as unsuccessful). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 182...

  • Page 191: Aaa

    2. Specify IP address or Hostname of the TACACS+ Server. 3. Specify Authentication Port for TACACS+ Server (Default is 49). 4. Specify secret key shared with the TACACS+ server. Figure 125: Common Server Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 183...
  • Page 192 8/24/48 Port GbE PoE Managed Switch User’s Guide Figure 126: TACACS+ Accounting Configuration Figure 127: RADIUS Authentication Configuration Figure 128: RADIUS Accounting Configuration Figure 129: TACACS+ Authentication Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 184...
  • Page 193 (zero), the default port (1813) is used on the RADIUS Accounting Server. Secret The secret - up to 29 characters long - shared between the RADIUS Accounting Server and the switch. TACACS+ Authentication Server Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 185...
  • Page 194 0 (zero), the default port (49) is used on the TACACS+ Authentication Server. Secret The secret - up to 29 characters long - shared between the TACACS+ Authentication Server and the.switch. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 186...

  • Page 195: Radius Overview

    The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this server. State The current state of the server. This field takes one of the following values: Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 187...
  • Page 196 This state is only reachable when more than one server is enabled Auto-refresh The page will be automatically refreshed at periodic intervals. Upper right icon Click to manually refresh the page. (Refresh) Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 188...

  • Page 197: Radius Details

    The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from the server. Rx Unknown Types The number of RADIUS packets that were received with unknown types from Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 189...
  • Page 198 The number of RADIUS packets containing invalid authenticators received from the server. Rx Unknown Types The number of RADIUS packets of unknown types that were received from the Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 190...
  • Page 199 Response and the Request that matched it from the RADIUS accounting server. The granularity of this measurement is 100 ms. A value of 0 ms indicates that there hasn't been round-trip communication with the server yet. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 191...

  • Page 200: Port Security

    3. Set Action (Trap, Shutdown, Trap & Shutdown). This is the action taken on the port when a security violation occurs. 4. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 132: Port Security Limit Control Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 192...
  • Page 201 Aging is disabled, only one SNMP trap will be sent, but with Aging enabled, new SNMP traps will be sent everytime the limit gets exceeded. Shutdown: If Limit + 1 MAC addresses are seen on the port, shut down the port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 193...
  • Page 202 For other methods, refer to Shutdown in the Action section. NOTE: Clicking the reopen button causes the page to be refreshed, so non- committed changes will be lost. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 194...
  • Page 203 The table has one row for each port on the selected switch. Port The port number for which the status applies. Click the port number to see the status for this particular port. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 195...
  • Page 204 If no user modules are enabled on the port, the Current column will show a dash (- If the Limit Control user module is not enabled on the port, the Limit column will show a dash (-). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 196...
  • Page 205 Otherwise a new age period will begin. If aging is disabled or a user module has decided to hold the MAC address indefinitely, a dash (-) displays. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 197...

  • Page 206: Access Management

    TELNET/SSH Indicates that the host can access the switch via TELNET/SSH interface if the host IP address falls in the IP address range provided in the entry. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 198...
  • Page 207 Number of allowed packets from the interface when access management mode is enabled. Discarded Packets Number of discarded packets from the interface when access management mode is enabled. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 199...

  • Page 208: Ssh

    3. Click Apply or click Reset to cancel changes and revert to previously saved values. Figure 137: SSH Configuration Parameter Description Mode Indicates the SSH mode operation. Possible modes are: Enabled: Enable SSH mode operation. Disabled: Disable SSH mode operation. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 200...

  • Page 209: Https

    Indicates the HTTPS redirect mode operation. Automatically redirect web browser to HTTPS when HTTPS mode is enabled. Possible modes are: Enabled: Enable HTTPS redirect mode operation. Disabled: Disable HTTPS redirect mode operation Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 201...

  • Page 210: Auth Method

    If none of the configured authentication servers are alive, the local user database is used for authentication. This is only possible if the Authentication Method is set to a value other than 'none' or 'local' Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 202...

  • Page 211: Maintenance

    1. Navigate to Maintenance > Restart Device. 2. Click Yes or No. Figure 140: Restart Device Parameter Description Restart Device Restart the switch from this page. After restart, the switch will boot normally. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 203...

  • Page 212: Firmware

    The front LED flashes Green/Off with a frequency of 10 Hz while the firmware update is in progress. Do not restart or power off the device at this time or the switch may fail to function afterwards. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 204...

  • Page 213: Firmware Selection

    To activate alternate firmware image via the web interface: 1. Navigate to Maintenance > Firmware > Firmware Selection. 2. Click Activate Alternate Image. Figure 142: Firmware Selection Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 205...

  • Page 214: Save / Restore

    To save current configuration to start-up configuration via the web interface: 1. Navigate to Maintenance > Save/Restore > Save Start. 2. Click Save. Figure 144: Save as Start Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 206...

  • Page 215: Save User

    XML format. To restore backup configuration via the web interface: 1. Navigate to Maintenance > Save/Restore > Restore User. 2. Click Save. 0. Figure 146: Restore Backup Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 207...

  • Page 216: Export / Import

    To export config file via the web interface: 1. Navigate to Maintenance > Export/Import > Export Config 2. Click Save configuration. 3. Save the file in the local device. Figure 147: Export Configuration Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 208...

  • Page 217: Import Config

    1. Navigate to Maintenance > Export/Import > Import Config. 2. Click Choose File to select the config file from the local device. 3. Click Upload. 0. Figure 148: Import Config – Update figure Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 209...

  • Page 218: Diagnostics

    64 bytes from 10.10.132.20: icmp_seq=1, time=0ms 64 bytes from 10.10.132.20: icmp_seq=2, time=0ms 64 bytes from 10.10.132.20: icmp_seq=3, time=0ms 64 bytes from 10.10.132.20: icmp_seq=4, time=0ms Sent 5 packets, received 5 OK, 0 bad Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 210...
  • Page 219 64 bytes from: 10.10.132.20: icmp_seq=1, time=0ms 64 bytes from: 10.10.132.20: icmp_seq=2, time=0ms 64 bytes from: 10.10.132.20: icmp_seq=3, time=0ms 64 bytes from: 10.10.132.20: icmp_seq=4, time=0ms Sent 5 packets, received 5 OK, 0 bad Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 211...
  • Page 220 The port for requiring VeriPHY Cable Diagnostics. Cable Status Port: Port number. Pair: The status of the cable pair. Length: The length (in meters) of the cable pair Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 212...

  • Page 221: Glossary Of Web-Based Management

    128 bits and a key size of 128, 192, or 256 bits. An acronym for Automatic Protection Switching. Use this protocol to secure bidirectional switching in the two ends of a protection group, defined in G.8031. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 213...
  • Page 222 Dynamic addressing simplifies network administration because the software tracks IP addresses rather than requiring an administrator to manage the Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 214...
  • Page 223 An acronym for Differentiated Services Code Point. It is a field in the header of IP packets for packet classification purposes. An abbreviation for Energy Efficient Ethernet defined in IEEE 802.3az. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 215...
  • Page 224 HTTP port 80 in its interactions with the lower layer, TCP/IP.) SSL uses a 40-bit key size for the RC4 stream encryption algorithm, which is considered an adequate degree of encryption for commercial exchange Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 216...
  • Page 225 128-bits Internet Protocol addresses. This number can be represented roughly by a three with thirty-nine zeroes after it. However, IPv4 is still the protocol of choice for most of the Internet. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 217...
  • Page 226 MAC table with these dynamic MAC addresses. Dynamic entries are removed from the MAC table if no frame with the corresponding SMAC address have been seen after a configurable age time. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 218...
  • Page 227 NFS enables the system administrator to store resources in a central location on the network, providing authorized users continuous access, which means NFS supports sharing of files, printers, and other resources as persistent storage over a computer network Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 219...
  • Page 228 POP3 An acronym for Post Office Protocol version 3. It is a protocol for email clients to retrieve email messages from a mail server. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 220...
  • Page 229 An acronym for Reverse Address Resolution Protocol. It is a protocol that is used to obtain an IP address for a given hardware address, such as an Ethernet address. RARP is the complement of ARP. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 221...
  • Page 230 Service Set Identifier is a name used to identify the particular 802.11 wireless LANs to which a user wants to attach. A client device will receive broadcast messages from all access points within range advertising the SSIDs, and can Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 222...
  • Page 231 IP manages and for reassembling the packets back into the complete message at the other end. Common network applications that use TCP include the World Wide Web (WWW), e-mail, and File Transfer Protocol (FTP). Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 223...
  • Page 232 VLAN unaware, members of one VLAN, and set up with this unique Port VLAN ID. Ports connected to the service provider are VLAN aware, members of multiple VLANs, and set up to tag all frames. Untagged Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 224...
  • Page 233 VLAN configured specially for voice traffic. By adding the ports with voice devices attached to voice VLAN, we can perform QoS-related configuration for voice data, ensuring the transmission priority of voice traffic and voice quality. Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 225...
  • Page 234 PowerFlex 8/24/48 Port GbE PoE Managed Switch User’s Guide Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com Revised: October 30, 2013 Page 226...
  • Page 236 Toll Free 1-866-ALLWORX • 585-421-3850 www.allworx.com Version: 1. Revised October 7, 2013...

Table of Contents