Table of Contents
Advertisement
Sw version
Displays the version of the software in your radio. You may be asked to quote this if you contact Technical Support.
Sw upgrade
You can upgrade the software in your EVOKE-1
select Sw upgrade and follow the instructions provided with the software. Upgrades may be issued to provide enhanced
functions or improve performance. Check our website at www.puredigital.com for details of when software upgrades are
available. To exit the software upgrade menu press the Menu button again.
Tuning aid
Provides a signal level display which you can use to find the best position for your radio and aerial.
1. Turn the Tune knob to scroll through different channels and push to select one (UK stations are in the range 11B
to 12D). You see a signal level display. The empty block indicates the minimum required level for reception and the
filled blocks indicate the current level.
2. Move your aerial while watching the display and to try to raise the current level to the empty block or beyond. Once
you have a good signal the display will show the multiplex name and add the stations to the station list.
3. Push the Menu button to exit the tuning aid or turn the Tune knob to select another channel.
Note You can also display the signal level at any time for a station you are listening to by pushing the Tune knob.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear at low volume or in a noisy
environment. The DRC (Dynamic Range Control) level of a broadcast is set by the station and sent with the signal. At
the time of writing in the UK only stations such as BBC Radio 3 and 4 regularly broadcast a DRC level. Check with the
broadcasters to find out if they use DRC on their stations. Turn the Tune knob to scroll through the following options and
push to select one:
DRC 0
DRC ½ DRC level is set to ½ that sent with the broadcast.
DRC 1
6
DRC is switched off. Any DRC level broadcast will be ignored. This is the default setting.
Applies the DRC level as sent with the broadcast.
XT
using a PC connected to the USB port on the rear panel. To upgrade,
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EVOKE 1XT and is the answer not in the manual?
Questions and answers
My Evoke 1xt has worked well for more than 10 years, but has suddenly gone crazy - e.g presets won't save, and when you turn it on you always get something called "Absolute Radio". Please can you advise? Does it have a long-life battery hidden somewhere?
If the Pure Digital EVOKE-1XT is not saving presets and defaults to "Absolute Radio," try resetting the radio. To reset:
1. Press and hold the Menu button for three seconds until the screen shows "Press Tune to confirm reset."
2. Push the Tune knob to confirm the reset or press no buttons to cancel.
The EVOKE-1XT does not mention having a long-life battery in the provided information.
This answer is automatically generated
how to I switch from digital radio to FM radio on a Pure Evoke-1xt radio?