The Polycom SoundStation Wireless in your SoundStation Wireless Microphones connect to your SoundStation Microphone package. If you are VTX 1000 or SoundStation IP 6000 , missing any items, contact your allowing you to wirelessly reinforce the SoundStation Wireless Microphone audio pick-up range during conference reseller.
Page 2
Features Mute / Unmute LED Battery door Mute / Pair key Power on/off switch Pair / Power LED Recess for Charging PIN Connecting the Receiver to the Conferencing Phone To connect the receiver, plug the RJ9 cable (attached to the receiver) into the microphone port on your SoundStation console.
Page 3
While using the charging cradle, the Pair / Power LED on the wireless microphone appears red. Once charging completes, the Pair / Power LED turns to green. Note:Polycom recommends that wireless microphones be fully charged (LED turns from red to green) before you use them the fi rst time.
Need help?
Do you have a question about the SoundStation IP 6000 and is the answer not in the manual?
Questions and answers