SKS-Kinkel Elektronik GmbH il vetro Audio Freisprechen Inhaltsverzeichnis Installation ................................3 Klemmenbezeichnung ............................3 Montageanleitung ............................... 3 Vorbereitung ..............................3 Montage auf Unterputzdose oder Hohlwanddose ..................4 Montage Aufputz ............................5 Demontage der Innensprechstelle ....................... 6 Anschluss ..............................6 Programmierung von Rufadressen ........................7 Programmierung von nur einer Rufadresse (ein Klingeltaster für eine Innensprechstelle) ......
Schraubendreher in die Entriegelungsöffnung auf der Unterseite der il vetro Audio Innensprechstelle hineindrücken. Nehmen Sie vorsichtig die il vetro Audio Innensprechstelle, wie auf der Zeichnung zu sehen, von dem Geräteträger ab. Ziehen Sie die Unterseite der il vetro Audio Innensprechstelle zu sich hin und heben Sie dann diese nach oben hin ab.
Achten Sie bei der Befestigung des Geräteträgers auf das Installationskabel! Schließen Sie die Anschlussklemmen an das zuvor verlegte Kabel an. Die Anschlussklemmen finden Sie auf der Rückseite der il vetro Audio Innensprechstelle. Die konfektionierten Anschlusskabel werden anschließend an der il vetro Audio Innensprechstelle angeschlossen.
Achten Sie bei der Befestigung des Geräteträgers auf das Installationskabel! Schließen Sie die Anschlussklemmen an das zuvor verlegte Kabel an. Die Anschlussklemmen finden Sie auf der Rückseite der il vetro Audio Innensprechstelle. Die konfektionierten Anschlusskabel werden nun an der il vetro Audio Innensprechstelle angeschlossen.
An den Klemmen E+/E- kann optional ein Etagentaster (Schließer) angeschlossen werden. Beachten Sie, dass die il vetro Audio Innensprechstelle nach dem Anschluss, sich für 25 Sekunden im Kalibriermodus befindet. Während des Kalibriervorgangs darf der Touchscreen nicht berührt werden, da ansonsten die fehlerfreie Funktion der Touchtasten nicht mehr gewährleitet werden kann.
SKS-Kinkel Elektronik GmbH il vetro Audio Freisprechen Programmierung von Rufadressen DIP-Schalter Programmiertaster Nur für Sonderfunktionen Programmierung von nur einer Rufadresse (ein Klingeltaster für eine Innensprechstelle) Nach der im Anhang befindlichen SKS-Bus-Rufadressentabelle die gewünschte Rufadresse des Gerätes am DIP- Schalter einstellen. Jede Rufadresse ist fest einem Klingeltaster an der Türstation zugeordnet. Die Rufadressenverteilung ist bei SKS Türstationen in der Türstation oder am Türlautsprecher hinterlegt.
SKS-Kinkel Elektronik GmbH il vetro Audio Freisprechen Bedienung Die Bedienung der il vetro Audio Innensprechstelle erfolgt ausschließlich über die Touchtasten. Mit den Touchtasten werden Hausrufe angenommen, weitere Funktionen ausgeführt und Einstelllungen vorgenommen. In der nachfolgenden Tabelle werden die Funktionen der Tasten beschrieben.
SKS-Kinkel Elektronik GmbH il vetro Audio Freisprechen Tür öffnen Um die Tür öffnen zu können betätigen Sie, nach einem Gespräch, einmal die Türöffnertaste. Das Zeitfenster, in dem der Türöffner betätigt werden kann, beträgt 2 Minuten nach dem Anklingeln der Anlage.
SKS-Kinkel Elektronik GmbH il vetro Audio Freisprechen Technische Daten Elektrische Daten 19 – 25 VDC Spannung a+ / b- Allgemeines Temperatur -10°C bis +45°C Feuchtigkeit 20% bis 90% nicht kondensierend Gehäuse Kunststoffgehäuse mit Glasoberfläche Abmessungen (Breite x Höhe x Tiefe)
Wir bieten ausschließlich Support für das Elektro-Handwerk, Architekten und Planungsbüros – Endkunden wenden sich bitte an Ihren Elektro-Handwerksbetrieb Anschrift SKS-Kinkel Elektronik GmbH, Im Industriegebiet 9, 56472 Hof/ Westerwald Tel.: +49 (0) 2661 980 88 0, Fax: +49 (0) 2661 980 88 200 E-Mail: info@sks-kinkel.de, www.sks-kinkel.de...
SKS-Kinkel Elektronik GmbH il vetro Audio hands-free il vetro Audio hands-free Installation Electrical shock hazard to persons. Danger of burns, damage to device and malfunctions. Observe VDE 0100 and VDE 0800 guidelines during installation. (Germany) Counter measures: Before beginning any work, deactivate and disconnect all energized electrical wires.
Carefully remove the il vetro Audio indoor station from the support frame as shown in the drawing. Pull the lower part of the il vetro Audio indoor station towards you and carefully lift it upwards. Mounting an flush mounted or cavity wall box...
Subsequently plug the terminals into the il vetro Audio indoor station. Remount the il vetro Audio indoor station in the upper part of the supporting frame. Subsequently press the il vetro Audio indoor station onto the frame until it clicks into place.
Carefully remove the il vetro Audio indoor station from the support frame as shown in the drawing. Pull the lower part of the il vetro Audio indoor station towards you and carefully lift it upwards. Support-Hotline: +49 (0) 2661 98088 112 - 16 - Version: 2.1...
The terminals E+/E- may optionally be used for floor buttons (normally open contact). Note that the il vetro Audio indoor station is in calibration mode for 25 seconds after the first start. Do not touch the touchscreen during the calibration process, otherwise an error-free function of the touch buttons can no longer be guaranteed.
SKS-Kinkel Elektronik GmbH il vetro Audio hands-free Programming of call addresses DIP-Switch Programming button Only for special functions Programming of only one call address (one bell button for one station) Set the required call address of the device at the DIP switch according to the SKS-bus call address table in the appendix.
Audio hands-free Operation The il vetro Audio indoor station is exclusively operated via the touch keys. Accepting a call, all the functions, as well as navigation in the menu are accomplished via the touch keys. Please find the functions of the touch keys in the table below.
SKS-Kinkel Elektronik GmbH il vetro Audio hands-free Open door To open the door following a conversation, press the door open key once. The time frame to open the door is 2 minutes long and starts with the first time the bell is rung.
We have checked the content of this document to verify that it corresponds to the hard- and software described herein. There may, however, be deviations and SKS-Kinkel GmbH may not be held liable for a lack of conformity. The information in this document is checked regularly and necessary changes are made in subsequent issues.
Need help?
Do you have a question about the il vetro and is the answer not in the manual?
Questions and answers