Table of Contents
Advertisement
Camera Gain
When operating in varying light conditions, you might want to increase or decrease your
camera's gain to avoid under exposing your images. To do this click the left arrow to decrease
gain and the right arrow to increase gain.
Your ATEM switcher will display gain in dB. This corresponds to the gain settings on your
camera in the following way:
Gain
-6
0
+6
+12
The gain settings are displayed
using dB indicators
Shutter Speed Control
Shutter speed control is used to change your URSA Broadcast's shutter speed.
The shutter speed control is located between the color wheel and the iris/pedestal control.
Decrease or increase the shutter speed by hovering your mouse pointer over the shutter speed
indicator and clicking the left or right arrow.
Hovering your mouse pointer over the gain, shutter
speed and white balance indicators reveal arrows
you can click on to adjust their respective settings
NOTE
As ATEM shutter speed control takes priority over the shutter speed selected
on your URSA Broadcast, your camera's shutter speed controls are disabled when
connected to an ATEM switcher.
It's worth mentioning that when your URSA Broadcast is connected to an ATEM switcher, the
shutter speed setting will not be visible in your camera's touchscreen status display, but will be
visible in an URSA Viewfinder, if attached. The status display setting will be implemented in a
future software update.
Understanding Studio Camera Control
189
Advertisement
Table of Contents
Need help?
Do you have a question about the URSA BROADCAST and is the answer not in the manual?
Questions and answers