JVC UX-G800D Instructions Manual page 9

To
Turn on or off (standby)
the power
Select a source
Adjust the volume
Drop the volume in a
moment
Activate the EALA
surround mode
Emphasize the sound
(Sound Turbo function)
Reinforce the bass
sound (Active Hyper
Bass Pro function)
Adjust the tone (Bass/
Treble)
Change the display
brightness
Change the display
information (Clock and
Source)
Set the ECO (ecology)
Mode
Press
System Remote
The STANDBY lamp on the System turns off/on.
See "Playing Back a Disc/USB Mass Storage Class Device" on
page 7.
See "Listening to the Radio" on page 9.
See "Listening to Digital Audio Player" on page 12.
Adjustable range: Level 0 ("VOL MIN") to level 40 ("VOL MAX").
To restore the volume, press again, or adjust the volume level.
—
The
— To cancel this function, press repeatedly until
lights off.
The S.TURBO indicator lights up.
To cancel this function, press again.
Press and hold until the AHB indicator lights up.
• When Sound Turbo function is activated (see above), this
— function cannot be activated.
To cancel this function, press and hold again when Sound
Turbo function is deactivated.
Press once for adjusting the bass level; twice for treble level,
then, press VOLUME +/–.
Adjustable range: –3 to +3.
—
Press when the System is turned on.
—
To cancel this function, press again.
For setting the clock, see "Setting the Clock and Using Timers"
— on page 13.
• Not applicable for FM.
Press when the System is on standby.
Setting the ECO mode allows you to reduce power consumption
— by turning the display off while on standby.
To cancel this function, press again when the System is on
standby.
Indication/Result
indicator lights up.
indicator
6