HP 9000 Installation Manual page 22

I/O Card Installation Guide
I/O Card Installation Procedure
In the example shown in the diagram below, an EISA card is being inserted in EISA
slot 4, path 20/5/4 (for Model D310), or EISA slot 4, path 8/20/5/4 (for all other
D3xx Models).
J. Replace the I/O 1. On all cards you have installed, insert and tighten the slot retaining screw (one
Card Retainer
Bracket
2. Place the I/O card retainer bracket onto the I/O card guide.
16
D3xx EISA Path Information
Model Number
D310
All other D3xx models
Specific EISA Slot Paths for Model D3xx Servers
D310 EISA Paths
EISA slot 7, path 20/5/7
EISA slot 6, path 20/5/6
EISA slot 5, path 20/5/5
EISA slot 4, path 20/5/4
EISA slot 3, path 20/5/3
(not used)
EISA slot 1, path 20/5/1
EISA slot 8, path 20/5/8
per card) to secure each card to the rear panel of the cabinet.
EISA Paths
20/5/<slot #>
8/20/5/<slot #>
All other D3x0 EISA Paths
EISA slot 7, path 8/20/5/7
EISA slot 6, path 8/20/5/6
EISA slot 5, path 8/20/5/5
EISA slot 4, path 8/20/5/4
EISA slot 3, path 8/20/5/3
(not used)
EISA slot 1, path 8/20/5/1
EISA slot 8, path 8/20/5/8