Page 1
CROSS CUT SHREDDER UAV 250 A1 CROSS CUT SHREDDER AKTENVERNICHTER Operating instructions Bedienungsanleitung IAN 288665 IAN 96272...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. GB / IE / NI Operating instructions Page DE / AT / CH...
Page 4
Read these operating instructions carefully before using the appliance for the first time and retain them for future reference. Please pass these operating instructions for the appliance on to any future owner(s). GB │ IE │ NI UAV 250 A1 1 ■ │...
Switch the appliance on, by moving the switch into the "AUTO" position. We recommend that you let the appliance cool down for about 30 minutes after 3 minutes of operation. GB │ IE │ NI UAV 250 A1 3 ■ │...
Never insert your finger into the central hole of a CD when you are feeding it into the appliance. ► Keep pets away from the appliance. They could hurt themselves. GB │ IE │ NI ■ 4 UAV 250 A1 │...
Page 8
Remain alert at all times! Always pay attention to what you are doing and act with common sense. Never use the appliance if you are distracted or don't feel well. GB │ IE │ NI UAV 250 A1 5 ■ │...
► Regularly remove any residue left in the cutting blades with a suitable tool, e.g. a pair of tweezers. Ensure that the appliance is unplugged before doing this. GB │ IE │ NI ■ 6 UAV 250 A1 │...
"OFF" position as soon as the jammed material has been ejected. Turning off the appliance ■ Switch the appliance off by moving the switch to the position "OFF". GB │ IE │ NI UAV 250 A1 7 ■ │...
Ensure that the appliance is unplugged before doing this. ■ Clean the appliance with a moist cloth. For stubborn dirt, add a little mild detergent to the cloth. GB │ IE │ NI ■ 8 UAV 250 A1 │...
2) Allow the appliance to cool down. 3) Put the mains plug back into the socket. 4) Switch the appliance on, by moving the switch into the "AUTO" position. GB │ IE │ NI UAV 250 A1 9 ■ │...
This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee. GB │ IE │ NI ■ 10 UAV 250 A1 │...
Page 14
(till receipt) and information about what the defect is and when it occurred. You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com. GB │ IE │ NI UAV 250 A1 11 ■ │...
Please note that the following address is not the service address. Please use the service address provided in the operating instructions. KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com GB │ IE │ NI ■ 12 UAV 250 A1 │...
Page 16
Lesen Sie die Bedienungsanleitung vor der ersten Verwendung aufmerksam durch und heben Sie diese für den späteren Gebrauch auf. Händigen Sie bei Weitergabe des Gerätes an Dritte auch die Anleitung aus. DE │ AT │ CH │ UAV 250 A1 13 ■...
Page 17
Unfallgefahren. Verwenden Sie dieses Gerät nicht gewerblich. Lieferumfang ■ Aktenvernichter (Schneidaufsatz, Auffangbehälter groß/klein) ■ Bedienungsanleitung Gerätebeschreibung Abbildung A: Schneidaufsatz Kleiner Auffangbehälter Sichtfenster Großer Auffangbehälter Abbildung B: Schneidöffnung CD/Kreditkarte Schneidöffnung Papier Schalter DE │ AT │ CH │ ■ 14 UAV 250 A1...
Page 18
Schalten Sie das Gerät ein, indem Sie den Schalter in die Position „AUTO” stellen. Wir empfehlen, nach 3 Minuten Betrieb das Gerät für ca. 30 Minuten abkühlen zu lassen. DE │ AT │ CH │ UAV 250 A1 15 ■...
Page 19
Stecken Sie nicht Ihre Finger in das zentrale Loch der CD, wenn Sie diese in das Gerät einführen. ► Halten Sie Tiere vom Gerät fern. Diese können sich verletzen. DE │ AT │ CH │ ■ 16 UAV 250 A1...
Page 20
Seien Sie stets aufmerksam! Achten Sie immer darauf was Sie tun und gehen Sie stets mit Vernunft vor. Benutzen Sie das Gerät in keinem Fall, wenn Sie unkonzentriert sind oder sich unwohl fühlen. DE │ AT │ CH │ UAV 250 A1 17 ■...
Page 21
HINWEIS ► Entfernen Sie regelmäßig eventuelle Rückstände in den Schneidmessern mit einem geeigneten Gegenstand, zum Beispiel mit einer Pinzette. Stellen Sie sicher, dass dabei der Netzstecker gezogen ist. DE │ AT │ CH │ ■ 18 UAV 250 A1...
Page 22
2) Stellen Sie den Schalter in die Position „OFF”, sobald das Schneidgut ausgegeben ist. Gerät ausschalten ■ Schalten Sie das Gerät aus, indem Sie den Schalter in die Position „OFF” stellen. DE │ AT │ CH │ UAV 250 A1 19 ■...
Page 23
Pinzette. Stellen Sie sicher, dass dabei der Netzstecker gezogen ist. ■ Reinigen Sie das Gerät mit einem feuchten Tuch. Bei hartnäckigen Verschmut- zungen geben Sie ein mildes Spülmittel auf das Tuch. DE │ AT │ CH │ ■ 20 UAV 250 A1...
Page 24
2) Lassen Sie das Gerät abkühlen. 3) Stecken Sie den Netzstecker wieder in die Steckdose. 4) Schalten Sie das Gerät ein, indem Sie den Schalter in die Position „AUTO“ stellen. DE │ AT │ CH │ UAV 250 A1 21 ■...
Page 25
Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen sofort nach dem Auspacken gemeldet werden. Nach Ablauf der Garantiezeit anfallende Reparaturen sind kostenpflichtig. DE │ AT │ CH │ ■ 22 UAV 250 A1...
Page 26
(Kassenbon) und der Angabe, worin der Mangel besteht und wann er aufgetreten ist, für Sie portofrei an die Ihnen mitgeteilte Service-Anschrift übersenden. Auf www.lidl-service.com können Sie diese und viele weitere Handbücher, Produktvideos und Software herunterladen. DE │ AT │ CH │ UAV 250 A1 23 ■...
Page 27
Importeur Bitte beachten Sie, dass die folgende Anschrift keine Serviceanschrift ist. Kontaktieren Sie zunächst die benannte Servicestelle. KOMPERNASS HANDELS GMBH BURGSTRASSE 21 DE - 44867 BOCHUM DEUTSCHLAND www.kompernass.com DE │ AT │ CH │ ■ 24 UAV 250 A1...
Page 28
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 DE - 44867 BOCHUM GERMANY www.kompernass.com Last Information Update · Stand der Informationen: 04 / 2017 · Ident.-No.: UAV250A1-042017-1 IAN 288665...
Need help?
Do you have a question about the UAV 250 A1 and is the answer not in the manual?
Questions and answers