BK Precision KNG Series Installation Manual

KNG MOBILE RADIO INSTALLATION GUIDE
1 INTRODUCTION
This document provides guidelines for the installation of BK Radio's KNG
Mobile radios. Failure to adhere to these guidelines may result in diminished
performance or physical damage to the radio. Installations should only be
performed by RELM authorized dealers or technicians.
2 GENERAL
Plan your installation carefully. Locate the radio and microphone within easy
reach, giving the operator a clear view of the display.
When selecting a mounting position for your KNG Mobile, look for a fl at surface
that will provide adequate space for the radio and cable attachments. For dash
mount installation clearance of at least 12" x 7 1/2" is recommended.
Do not locate the radio, microphone or speaker in a position that interferes with
safe operation of the vehicle or equipment.
It is recommended to run all necessary cables or wires prior to installation of a
radio or remote control head.
RECOMMENDED INSTALLATION ORDER
1. Prepare and route power cable assembly
2. Connect Ignition sense (if used)
3. Install Antenna(s) and route cable
4. Install remote speaker(s) and route speaker wire
5. Route any connections to be made to the radio or remote accessory
connector(s)
6. Install remote control head (if used)
7. Install dash mount/radio core
3 REQUIRED EQUIPMENT
• Small fl at blade screw driver.
• Wire crimper or pliers
• KAA0630 KNG Dash mount installation kit
ADDITIONAL EQUIPMENT
• KAA0638 KNG Remote mount installation kit
• KAA0635, KAA0636 or KAA0637 Remote mount cable assembly