Glass Replacement - Blue Bird Micro Bird Operator's Manual

MICRO - BIRD

GLASS REPLACEMENT

The glass used in your bus meets Federal Motor Vehicle Safety
Standards 201 and 217. Therefore, when a glass is broken, it should
be replaced with identical glass.
The following instructions are for replacing glass in the side
split sash window, rear and rear side vision, entrance door.
WARNING: When replacing broken or damaged glass use
extreme care at all times to prevent personal injury. This in-
cludes the use of proper replacement parts, tools, and personal
protective equipment such as gloves and safety eyeglasses.
SPLIT SASH
1. Remove four screws securing window to bow (Fig. 1).
2. Pull window to inside of body and remove (Fig. 2).
3. Remove six screws (three on each side of window) holding
main assembly together (Fig. 3).
4. On bottom glass simply pull aluminum channel off top and
bottom of glass (Fig. 4).
5. To remove glass from top part of window, remove six screws
holding frame around glass (Fig. 5).
6. Reassemble window by reversing above procedure.
7. Apply weather seal caulking around window frame on outside
of body to prevent leaking.
32
Fig. 1 Fig. 2