Advertisement
41" Tool Chest & Cabinet
Actual product may differ
slightly from image shown
EACH UNIT SOLD SEPERATELY
Chest Model #: 245-1932/245-1936/245-1940/245-1944
Cabinet Model #: 245-1934/245-1938/245-1942/245-1946
CAUTION: To Reduce The Risk Of Injury, User Must Read
And Understand Operator's Manual. Save These Instructions
For Future Reference.
OPERATOR'S MANUAL
Page 2
Advertisement
Table of Contents
Summary of Contents for Menards MASTERFORCE 245-1932
- Page 1 41" Tool Chest & Cabinet Actual product may differ slightly from image shown EACH UNIT SOLD SEPERATELY Chest Model #: 245-1932/245-1936/245-1940/245-1944 Cabinet Model #: 245-1934/245-1938/245-1942/245-1946 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
- Page 2 TABLE OF CONTENTS Safety Symbols ................. 2 Safety Instructions ..............3 Parts List ................... 4 Assembly and Operation ............5 Maintenance and Safety ............7 Page 1...
-
Page 3: Safety Symbols
SAFETY SYMBOLS Model #: _______________________________ CAUTION: Place of purchase: ______________________ 1. Read and follow all safety and assembly instructions before using this product for the first time. Date of purchase: _______________________ 2. Fill in the following information and retain the manual for future reference: Receipt # of purchase: __________________ Do not open more than one drawer at a time. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures. -
Page 5: Parts List
PARTS LIST For service regarding parts, assembly or warranty information, please call: 1-800-459-4409. The keys are taped to bottom The keys are taped to the top of the left drawer of the chest. caster carton, which is placed in the bottom drawer of the cabinet. Ref# Description Part# Ref# Description... -
Page 6: Assembly And Operation
ASSEMBLY AND OPERATION NECESSARY TOOLS REQUIRED INSTALL THE CASTERS FOR ASSEMBLY NOTE: Two or more people may be required • 10 mm socket to complete this step. • 14 mm socket Carefully lay the bottom cabinet on its • Extension ratchet back using a soft mat under the back for protection. - Page 7 ASSEMBLY AND OPERATION RAISE AND RELEASE TO REMOVE DRAWERS DRAWER FRONTS Pull the drawer out so it is almost fully extended. PUSH UP on the black release This unit is equipped with raise and release lever on one side, while PULLING DOWN drawer fronts.
-
Page 8: Maintenance And Safety
MAINTENANCE AND SAFETY MAINTENANCE WARNING: WEAR SAFETY GLASSES when removing or repositioning Lubricate the casters with high quality the slides. The tool could slip which may bearing grease once a year. cause personal injury. Lubricate the slides twice a year with CAUTION: When moving this a product like WD40 or other quality... - Page 9 MAINTENANCE AND SAFETY If this equipment does cause harmful CAUTION: maximum interference radio television product weight, including contents, should reception, which can be determined by be no more than 2000 lbs. turning the equipment off and on, the user is encouraged to try to correct the WARNING: DO NOT attach or interference by one or more the following...
- Page 10 NOTES Page 9...
- Page 11 41" Tool Chest & Cabinet LIMITED LIFETIME WARRANTY MASTERFORCE Tool Cabinets and Chests have been manufactured to the highest ® standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product.
- Page 12 ©2017 Menard, Inc., Eau Claire, WI 54703 V1 07/2017...
Need help?
Do you have a question about the MASTERFORCE 245-1932 and is the answer not in the manual?
Questions and answers